Ppplasterers

[Ppj]

I wonder if anyone can tell me which are the best fixings for k rend beads

 

[Dansouthcoast84]

the basecoat

 

[tapit]

I wonder if anyone can tell me which are the best fixings for k rend beads

Fuckknows, @Tom81 ?

 

[smoother09]

Multifinish

 

[Ritch]

I wonder if anyone can tell me which are the best fixings for k rend beads

Not tapit tape

 

[tapit]

Not tapit tape

Possibly?

 

[Ftp321]

Fuckknows, @Tom81 ?

Beaadfix tape, all day!!

 

[Olican]

I wonder if anyone can tell me which are the best fixings for k rend beads

@John j

 

[Rossi46]

That Pink grippy stuff. Can’t remember what it’s called

 

[Olican]

That Pink grippy stuff. Can’t remember what it’s called

 

[SmoothCriminal]

Plastic pinned hammer fixings. All day every day! Anything else is slow an a pain in the arse. Get the sds out an batter on! Best fixing an no f**k**g about. Dabbing on is cowboy stuff.

 

[Rossi46]

Plastic pinned hammer fixings. All day every day! Anything else is slow an a pain in the arse. Get the sds out an batter on! Best fixing an no f**k**g about. Dabbing on is cowboy stuff.

Great on new build but when there’s a lot of adjusting it’s awkward

 

[Vincey]

Plastic pinned hammer fixings. All day every day! Anything else is slow an a pain in the arse. Get the sds out an batter on! Best fixing an no f**k**g about. Dabbing on is cowboy stuff.

Have you a link to which you use please

 

[Vincey]

Doesn’t anyone else use clout nails anymore ?

 

[smoother09]

Doesn’t anyone else use clout nails anymore ?

No copper nails far better!

 

[SmoothCriminal]

Great on new build but when there’s a lot of adjusting it’s awkward

I hardly ever work on new builds. Sprit level or sometimes the trust worthy eye levels do better when other things are off. Cant use sprit levels all the time. Just google them, I can’t remember where I last got mine. Was a local shop but plenty online. The pin ones are good but sometimes you don’t even need the pin. The wide head works great on bead work. Drilling cuts out any surfaces that are to hard or weak for nails etc plus cuts out drying times an gravity movement/weather conditions etc.

 

[Ftp321]

There's no better fixing than bedding them into basecoat but for speed and efficiency pinkgrip every time

 

[John j]

@John j

Tapit

 

[tapit]

I would normally use base coat with a couple of strips of tape to hold until it goes off.

 

[Bigstevehammer]

Willpower and shear determination..

And prit-stick