Rendaid £15 plus vat?

[Vincey]

Thanks arti and j

 

[Arti]

The advantage of rendaid is you can mesh it but if your just after a key use micro.

 

[Jgreenplastering]

The advantage of rendaid is you can mesh it but if your just after a key use micro.

We always meshed our rend aid. Always helps with poor substrates like old bricks and poor joints. Weber frown on it in the rend aid though don't they.

 

[Orangemachineman]

Best to mesh the first pass of mono not rend -aid[emoji106]


Sent from my iPhone using Tapatalk

 

[Arti]

I agree

 

[Arti]

We always meshed our rend aid. Always helps with poor substrates like old bricks and poor joints. Weber frown on it in the rend aid though don't they.

It's in there spec marra

 

[Jgreenplastering]

It's in there spec marra

I thought they always specced the mesh in the top third of the render?

 

[FreeD]

No worries meshing the first pass on new build, but not on re furb, otherwise you end up scratching back to the mesh on a high point, which is what happened to me once.

 

[FreeD]

Better off in the Rend Aid don't care what Weber say.

 

[Orangemachineman]

I thought they always specced the mesh in the top third of the render?

It's 2/3 of the system so in theory first pass of mono right?


Sent from my iPhone using Tapatalk

 

[Vincey]

Was asking about the rendaid thickness as had all ocr on a gable yesterday for about 11am left the job a nearly 7pm ,the gear was soaking until about 3pm so been trying to work out what made it hang all day , when I used ocr straight onto blocks it firmed up nicely within an hour ish

 

[Jgreenplastering]

Was asking about the rendaid thickness as had all ocr on a gable yesterday for about 11am left the job a nearly 7pm ,the gear was soaking until about 3pm so been trying to work out what made it hang all day , when I used ocr straight onto blocks it firmed up nicely within an hour ish

Probably the rend aid mate. Did you damp it down or had it rained in last 24 hours?

 

[Vincey]

Probably the rend aid mate. Did you damp it down or had it rained in last 24 hours?

Rendaid did last Wednesday,it had rained Sunday and was raining yesterday,turned out ok just,was thinking might of sprayed ocr on to thick as well as wall was on the piss at top of gable,lower down it dried tiny bit quicker but can remember rendaid was tight down the bottom