Render Boards

[kebab king]

Never used any before. Whats the best ones to get and where do you get em from.

 

[johniosaif]

@runwithscissors is the man for this question

 

[kebab king]

Cool, its going onto a timber built extension then wants traditional sand and cement over them.Neber done em like this before.

 

[Danny]

@Runswithscissors is your man

 

[22jasper]

Minsters/Sheffield/Encon always stock them.

Cheaper with OSB/Marine, barrier paper/membrane, riblath then s&c. Don't know if s&c can be used with render carrier board, probably need bagged polymers

 

[warriorupnorth]

you can pick aquapanel up at 12 quid a 900 x 1200 sheet then you a polymer mate, or wallcrete
which you can sponge, scrape, carve or print

 

[kebab king]

So, you cannot use s&c on to render boards ?.

 

[warriorupnorth]

no mate

 

[plasterjfe]

So, you cannot use s&c on to render boards ?.

Would ne pointless. You cant directly apply s and c to render board. You still meed to give it an aid to stay on the wall like rendalath or eml but cracking is still highly likely.

Use polymer adhesive coat for spec or if it has to be sand and c then save your money on a render carrier and go with the wooden board lath/eml building paper method.


Warrior where u gettin aquapanel at that price?

 

[kebab king]

Ok, cheers guys, ill quote for the good old way then.

 

[Runswithscissors]

Hi Guys

in a way you are all correct.....

Aquapanel Exterior can have a S&C finish, but you will need a basecoat and mesh finish first to stop any movement on the TF cracking straight through the S&C down the board joints.....

The board, basecoat, mesh and S&C will coat a little more in materials, but will be a much faster system and give a thinner and lighter wall, which will be less likely to crack.....

JJ - Give me a call if you want to discuss if further, if you go in EML and S&C, you could still price the alternative and see what you think.

 

[Runswithscissors]

Knauf Aquapanel Exterior comes in 2 board sizes:

1200 x 900 x 12.5mm
and
2400 x 900 x 12.5mm

The m2 price is usually the same for both sizes..... the smaller size is ideal for extensions and small refurb work...... bigger boards better for new build and larger projects.

Best to shop around the various distributors and merchants to get a comparitive price.

Some stock the external, some don't but can get them in very quickly. Some will break a pallet for smaller volumes as well, best to ask!

Good Luck Guys

Richard Lord
07918766577

 

[kebab king]

I`ll give you a bell 2moz Rich.

Cheers me old bell end.

 

[warriorupnorth]

Richard, Richard, Richard, that was probably the worst mistake of your life, giving JJ your mob number,
or is that @richardbrown

 

[plasterjfe]

Just noticed the size paul nevermind

 

[Runswithscissors]

Richard, Richard, Richard, that was probably the worst mistake of your life, giving JJ your mob number,
or is that @richardbrown

Oh No....... :RpS_scared:

Will it really be that bad......? :RpS_blushing:

Schoolboy error.....

 

[clayplasterman]

Oh No....... :RpS_scared:

Will it really be that bad......? :RpS_blushing:

Schoolboy error.....

Dont invite him round your house JJ :RpS_scared: