Reveals

[carys]

Porch need dashing. 1 inch reveal one side of door nothing on other side. no reveal at all not even half inch and it blown becouse they have tried to build reveal up. Any idea before I tell you my idea to see if you agree! Ha.., By the way dash is getting painted.

 

[Ftp321]

Porch need dashing. 1 inch reveal one side of door nothing on other side. no reveal at all not even half inch and it blown becouse they have tried to build reveal up. Any idea before I tell you my idea to see if you agree! Ha.., By the way dash is getting painted.

Just bed the bead out to match the other side

 

[carys]

Just bed the bead out to match the other side

Can't do that pass plastic cladding at top of door

 

[John j]

Move door

 

[tapit]

Can't do that pass plastic cladding at top of door

Picture

 

[The Hobo]

just bullnose it

 

[carys]

Picture

Haven't got picture I've left! Nothing much you can do. Only way start the porch again not doing that! My idea ws to put stop bead on reveals then he can put plastic bead on reveal 1inch to half inch reveal not hold with double glaze door geting wacked by kids

 

[Topspread16]

Knock corner off and roll it in.

 

[tapit]

Haven't got picture I've left! Nothing much you can do. Only way start the porch again not doing that! My idea ws to put stop bead on reveals then he can put plastic bead on reveal 1inch to half inch reveal not hold with double glaze door geting wacked by kids

Go back and take one.

 

[carys]

Go back and take one.

No lol. Il take one before after. Nothing much you can do. You could put a corner bead ther scratch coat to half inch plant on. Over edge cladding. All becouse of a s**t bricki lol

 

[carys]

just bullnose it

Bullnose a external reveal on modern house don't think it look rhight!

 

[smoother09]

Hard angle

 

[The Hobo]

Bullnose a external reveal on modern house don't think it look rhight!

maybe bullnose was the wrong term as @Topspread16 said a round corner

 

[carys]

Hard angle

maybe bullnose was the wrong term as @Topspread16 said a round corner

Bull nose round corner is ther much difrent!

 

[The Hobo]

Bull nose round corner is ther much difrent!

about 4inch

 

[superspread]

Porch need dashing. 1 inch reveal one side of door nothing on other side. no reveal at all not even half inch and it blown becouse they have tried to build reveal up. Any idea before I tell you my idea to see if you agree! Ha.., By the way dash is getting painted.

Freehand it

 

[carys]

Freehand it

Lol you can't free hand a reveal and then dash. It!!

 

[SmoothCriminal]

Why not build it up with beckerboard or whatever until you reach a ok thickness to scratch an top coat dash. Obviously need the correct material to go over beckerboard.

 

[superspread]

Lol you can't free hand a reveal and then dash. It!!

It’s an inch wide ffs,Hold a bit of timber up, apply s&c , throw ur stones ,

 

[carys]

It’s an inch wide ffs,Hold a bit of timber up, apply s&c , throw ur stones ,

It not geting a reveal.. The problem is a half nch reveal build up whith scratch will not hold the impact of a door!!

 

[essexandy]

It’s an inch wide ffs,Hold a bit of timber up, apply s&c , throw ur stones ,

Always looking for the fast option. Vroom vroom.