Ritmo is ready to be picked up from Pft wales

[Mag]

[QUOI E="Mag, post: 971597, member: 17494"]Do it I've taken the plunge it's a no brainer

Yea i think I will, ive a couple of small jobs sitting ready would be good wee starters.[/QUOTE]
I've got a bungalow to do so I'll start on that then hopefully I'll have the hang of it as I've two houses to crack on with . Happy days ?

 

[pixie]

Home fresh as a daisy for once thatll b a strange feeling. Im a Walking zombie at times maybe find some energy to hit the gym

 

[theclemo]

Best of luck Keith.Its the best bit of kit you will ever buy.Take your time in set up and go through every step twice.tape up electric point and tap and kill anyone who touches them.Most important do not reduce rates because you can cover more than hand balling.

My rates are going up so I can get my money back lol. Spent more money today on extras. The wife was at the bank today and didn't say anything. I take it she didn't look in the account lol

 

[theclemo]

Ive never used hardwall myself, or hardcoat as it is here just float and set. Cheapskate builders lol. All sounds good though

U should ring ramboo tools there in North of Ireland. Go there and have a look at the ritmo

 

[Orangemachineman]

Good luck with it. There will be problems in the early days we all have had them.

I will pm you my mobile number in case the pft dealers cannot answer your call.

Awesome

 

[Andy M]

Wha

what time are you putting on .?

That's on nice straight areas,start between 7 to 8 finish 10 or 11.
Over based at 10mm,obviously less if soil stacks and fiddly areas come into play

 

[Orangemachineman]

Not much talk of this m-tec200 of late!!

 

[Arti]

Not much talk of this m-tec200 of late!!

Oooooooooooooo u bitch :0

 

[Orangemachineman]

Awesome

I saw the post on Facebook mate
Didn't realise you was Keith!'

 

[Plasterers1StopShop]

Not much talk of this m-tec200 of late!!

There has been a fair bit Bobby. Just not on here as I have people contacting me directly regarding it

 

[Mag]

Not much talk of this m-tec200 of late!!

All
About the Ritmo don't you know lmao

 

[Orangemachineman]

Funny as I've not seen any updates on Facebook,LinkedIn,Twitter etc!!

 

[Mag]

I wa

Not much talk of this m-tec200 of late!!

i was looking at the Mtec 300 330 but went for the Ritmo as im on the l plates

 

[Plasterers1StopShop]

Funny as I've not seen any updates on Facebook,LinkedIn,Twitter etc!!

That's correct, we haven't needed to do anything. We have a number of people calling regarding the M200 and all machines at the moment.

We had M-tec over this week checking out a new thing we have designed for machines - which is made in England and will be a huge asset to the M200.

Keep your eyes peeled mate

 

[theclemo]

My first go today with the ritmo.

Check out @RambooTools's Tweet: https://twitter.com/RambooTools/status/751536855934504960?s=09

 

[Orangemachineman]

I wa

i was looking at the Mtec 300 330 but went for the Ritmo as im on the l plates

Good choice mags
The ritmo is a decent machine mate

 

[Orangemachineman]

My first go today with the ritmo.

Check out @RambooTools's Tweet: https://twitter.com/RambooTools/status/751536855934504960?s=09

Did you use Ian's toilet ?

 

[Orangemachineman]

That's correct, we haven't needed to do anything. We have a number of people calling regarding the M200 and all machines at the moment.

We had M-tec over this week checking out a new thing we have designed for machines - which is made in England and will be a huge asset to the M200.

Keep your eyes peeled mate

So no machines sold and on site as yet?

 

[theclemo]

Did you use Ian's toilet ?

I didn't get the machine from Ian. I got it from a pft dealer called ramboo tools in Northern Ireland. I can only imagine what his toilet is like lol

 

[Plasterers1StopShop]

So no machines sold and on site as yet?

They haven't arrived yet due to the changes we have made.

Each customer who has paid a deposit knows what's happening and what's new. I will post all the relevant data soon for you to see.

We have sold a fairly large number of machines and have now put in a second order with M-tec as a matter of urgency

 

[theclemo]

I think Danny should band the machine threads all ways leads to fighting lol. I wonder is it like this on car forums my car is faster than your can. My car can do x amount of miles to a tank. I personally couldn't give a f**k what machine anybody uses or what car they drive.

 

[Orangemachineman]

I think Danny should band the machine threads all ways leads to fighting lol. I wonder is it like this on car forums my car is faster than your can. My car can do x amount of miles to a tank. I personally couldn't give a f**k what machine anybody uses or what car they drive.

Fighting?its a forum to chat about stuff!!

 

[Orangemachineman]

My first go today with the ritmo.

Check out @RambooTools's Tweet: https://twitter.com/RambooTools/status/751536855934504960?s=09

What's your thoughts?

 

[pixie]

U should ring ramboo tools there in North of Ireland. Go there and have a look at the ritmo

U should ring ramboo tools there in North of Ireland. Go there and have a look at the ritmo

Ive been speaking to them already mate a few weeks ago was checking for a second hand g4 and genny but they didnt have any as yet, so been thinking a ritmo might b a good starter for me. Theyre not too far from me so should be all good. Let us know how u get on with yours and good luck.

 

[Pagey]

gone for it and got a machine hope it works out for ya

 

[Pagey]

Gotta give it to the blokes who actually invested in a machine and took the gamble not many plasterers have a spare 5k for a gamble that's why I always hope it pays off for them

 

[Mag]

On youe

I think Danny should band the machine threads all ways leads to fighting lol. I wonder is it like this on car forums my car is faster than your can. My car can do x amount of miles to a tank. I personally couldn't give a f**k what machine anybody uses or what car they drive.

Are you on your period bitch

 

[theclemo]

Gotta give it to the blokes who actually invested in a machine and took the gamble not many plasterers have a spare 5k for a gamble that's why I always hope it pays off for them

The way I look at it is if you have the machine 5 years it's only £20 a week. Less than 2m2 a week to pay for the machine. What am going to do is on my first 2 jobs with the machine am not going to give my slef a wage. My aim is to get the money back i spent on the machine as soon as I can. Plus I have already made 2 new contacts for work because I have a machine.

 

[stuart23]

My first go today with the ritmo.

Check out @RambooTools's Tweet: https://twitter.com/RambooTools/status/751536855934504960?s=09

That seems really slow, is it a slow r and s on it? I'm only comparing it to my strata that flys out at a rate I struggle to keep up with

 

[theclemo]

That seems really slow, is it a slow r and s on it? I'm only comparing it to my strata that flys out at a rate I struggle to keep up with

I think it was speed 9 with a B4-2L r@s it was weber. Is there a r@s I can get that go's faster.

 

[Arti]

I think it was speed 9 with a B4-2L r@s it was weber. Is there a r@s I can get that go's faster.

I'm happy with that speed on mine

 

[Rigsby]

The L is about as fast as a 4-3 r&s. A bit slow for big walls but perfect for domestics.

 

[theclemo]

I'm happy with that speed on mine

I am to i was putting on about 12mm in the video. At that speed u get it on level a lot easier to rule

 

[zolco]

Good luck with your new purchase clemo!

Sent from my Nexus 6P using Tapatalk

 

[Pagey]

The way I look at it is if you have the machine 5 years it's only £20 a week. Less than 2m2 a week to pay for the machine. What am going to do is on my first 2 jobs with the machine am not going to give my slef a wage. My aim is to get the money back i spent on the machine as soon as I can. Plus I have already made 2 new contacts for work because I have a machine.

That's a good way of looking at it and sounds like you got a plan let the money roll in