Ritmo start up

[Elite exteriors]

Hi Guys just bought a ritmo and so far so good but I was just wondering what happens when you try setting up with too much or too little powder and how I'd know if I'd have done either,sometimes it difficult to see and it's probably just a matter of time before one or the other happens
Cheers

 

[Complete]

Too little and you'll just run wet gear, run off into a tub before you connectvyou materials hose you you know if it's right before you waste a hose full.
Too much and you could jam the r&s. In that case the only thing I've been able to do is disconnect the r&s, dump the gear, wash out and start again.
Shouldn't be a regular mistake though so wouldn't worry too much

 

[Bigstevehammer]

Hi Guys just bought a ritmo and so far so good but I was just wondering what happens when you try setting up with too much or too little powder and how I'd know if I'd have done either,sometimes it difficult to see and it's probably just a matter of time before one or the other happens
Cheers

You’ll know soon enough if you’ve too much powder in…your heart will go in your mouth and you’ll be on the phone to the lord

 

[Elite exteriors]

You’ll know soon enough if you’ve too much powder in…your heart will go in your mouth and you’ll be on the phone to the lord

So basically too much powder on startup will jam the rotor and stator and that's about it

 

[theclemo]

So basically too much powder on startup will jam the rotor and stator and that's about it

what ritmo is it

 

[essexandy]

what ritmo is it

I'm reliably informed that the Ritmo's run particularly well on Smet gear. Is this right mate and would you happen to know where it's available from? Tia.

 

[theclemo]

I'm reliably informed that the Ritmo's run particularly well on Smet gear. Is this right mate and would you happen to know where it's available from? Tia.

It sure does I'd have to ask a mate where he gets it from he says it's the best of the best tho

 

[Elite exteriors]

what ritmo is it

Slimline l

 

[theclemo]

Slimline l

slimline u can't fill up with render on startup the machine won't jam if you do fill it up what happens is when spraying u get the render coming out the gun and every few seconds it stops coming out the gun and gos again. the ritmo l or m u can fill up the hopper b4 u start the machine