Did one last week.Is there many still rubbing on traditional sand and cement render with the hawk and trowel or is the pump machine doing must of it now
If you're hand applying these days you're behind the times or too tight to buy a machine or just don't really do enough renderingIs there many still rubbing on traditional sand and cement render with the hawk and trowel or is the pump machine doing must of it now
well done elite, all 3 apply to meIf you're hand applying these days you're behind the times or too tight to buy a machine or just don't really do enough rendering
DinasourStarting one next week.
Getting paid well for it as well. And we're painting it as well.Dinasour
Good ladGetting paid well for it as well. And we're painting it as well.
Still tons of s&c down my way, the only houses get coloured render down here are the s**t boxes persimmons and the likes of build, look totally shite in 6-12 months, too green and wet/damp for coloured render, even sealed they still go green algae all overIf you're hand applying these days you're behind the times or too tight to buy a machine or just don't really do enough rendering
There's bagged s&c render that goes on machine applied or by hand I was referring to the method not the productsStill tons of s&c down my way, the only houses get coloured render down here are the s**t boxes persimmons and the likes of build, look totally shite in 6-12 months, too green and wet/damp for coloured render, even sealed they still go green algae all over
Definitely well said its wank all this mono and acrylic. Ballbags with machines thinking there god any idiot can spray that dungStill tons of s&c down my way, the only houses get coloured render down here are the s**t boxes persimmons and the likes of build, look totally shite in 6-12 months, too green and wet/damp for coloured render, even sealed they still go green algae all over
Getting paid well for it as well. And we're painting it as well.
I understand spraying coloured render its heavy, but not thin coat it’s like skimming outside.Definitely well said its wank all this mono and acrylic. Ballbags with machines thinking there god any idiot can spray that dung
It's all wank just gave a mate of mine 150 mtrs of mono can't stand it .plus it near stop passing down in ManchesterI understand spraying coloured render its heavy, but not thin coat it’s like skimming outside.
Do you mix with the 4 bag mixerStarting one next week.
Its what customers want and it's really easy too using machines you get a lot more done with less men twice as fastIt's all wank just gave a mate of mine 150 mtrs of mono can't stand it .plus it near stop passing down in Manchester
I know I've used g4sIts what customers want and it's really easy too using machines you get a lot more done with less men twice as fast
One of these mate. Bigger drum than most site mixers.Do you mix with the 4 bag mixer
I know I've used g4s
Have you any experience with machines?I understand spraying coloured render its heavy, but not thin coat it’s like skimming outside.
So are you too tight or behind the times or don't do enough renderingI know I've used g4s
Yes all 3So are you too tight or behind the times or don't do enough rendering
S&C is King ffs, when you going to learn, machine rendering to many headaches and expensive overheads, I'll be back on the hawk and trowel when I've finally made my money back for these poxy machines.So are you too tight or behind the times or don't do enough rendering
Sounds like u got sucked into buying a machine , I can’t fault the machine’s they all good, but we handball any product and we not far behind, float and set forget the machine . As long as I’m fed by 2-3 labourers we will keep upS&C is King ffs, when you going to learn, machine rendering to many headaches and expensive overheads, I'll be back on the hawk and trowel when I've finally made my money back for these poxy machines.
Getting paid well for it as well. And we're painting it as well.
bro I know how you feel i fell into the same trap and bought 3 of them and boy am I regretting itS&C is King ffs, when you going to learn, machine rendering to many headaches and expensive overheads, I'll be back on the hawk and trowel when I've finally made my money back for these poxy machines.
you will not keep up to a machine unless you have more than twice as many men on the scaffoldSounds like u got sucked into buying a machine , I can’t fault the machine’s they all good, but we handball any product and we not far behind, float and set forget the machine . As long as I’m fed by 2-3 labourers we will keep up
they would have to be brain dead to pick up a hardboard and trowel after using a machine buddyI can understand why they have the machines, because I’ve seen a few gangs do a brilliant job, but let them come and compete handballing and let’s see if they can do it, I’m sure a lot of them will quit
Love your comment u a funny guy, u sound stressed don’t let it beat uS&C is King ffs, when you going to learn, machine rendering to many headaches and expensive overheads, I'll be back on the hawk and trowel when I've finally made my money back for these poxy machines.
I agree u need a certain amount of men on each lift, but it can be doneyou will not keep up to a machine unless you have more than twice as many men on the scaffold