Settlement/shrinkage cracks

B

Borris123

New Member
Hi everyone,

I'm looking for advice on hairline cracks that have developed recently on my new build. The attached photo shows a crack running from top left of ground floor window to corner of first floor sill above it. This is on the front elevation and an almost identical crack pattern has developed on the opposite end of the elevation between two similar windows (I've included a picture of the full elevation for some perspective). The house was plastered in August 2019 but the cracks only became evident during the very warm dry spell we had during lockdown in April/May. No cracks anywhere else on the building, just the front elevation :( Painter has said he can address these but I'm in two minds as to whether I proceed with this or chip off the render and start again. Some have said that it should have been meshed, which it wasn't. Any tips or recommendations very welcome. Thanks!
James
20200719_121930.jpg
 

Attachments

  • Settlement/shrinkage cracks
    20200802_112216.jpg
    5.7 MB · Views: 250
Borris123 said:
Hi everyone,

I'm looking for advice on hairline cracks that have developed recently on my new build. The attached photo shows a crack running from top left of ground floor window to corner of first floor sill above it. This is on the front elevation and an almost identical crack pattern has developed on the opposite end of the elevation between two similar windows (I've included a picture of the full elevation for some perspective). The house was plastered in August 2019 but the cracks only became evident during the very warm dry spell we had during lockdown in April/May. No cracks anywhere else on the building, just the front elevation :( Painter has said he can address these but I'm in two minds as to whether I proceed with this or chip off the render and start again. Some have said that it should have been meshed, which it wasn't. Any tips or recommendations very welcome. Thanks!
James
View attachment 52224
Click to expand...
Looks pretty shocking finish in my opinion looks like it’s been finished soaking wet with all those crazy shite swipe marks almost looks like it’s been dragged floated was it done in winter ?
 
Wtf kind of finish is that more to the point! That’s gonna look like dogshit when painted rough as assholes
 
Ritch said:
Looks pretty shocking finish in my opinion looks like it’s been finished soaking wet with all those crazy shite swipe marks almost looks like it’s been dragged floated was it done in winter ?
Click to expand...
Beat me to it utter shite lol how f**k people let um get away with it :ROFLMAO:
 
Borris123 said:
Hi everyone,

I'm looking for advice on hairline cracks that have developed recently on my new build. The attached photo shows a crack running from top left of ground floor window to corner of first floor sill above it. This is on the front elevation and an almost identical crack pattern has developed on the opposite end of the elevation between two similar windows (I've included a picture of the full elevation for some perspective). The house was plastered in August 2019 but the cracks only became evident during the very warm dry spell we had during lockdown in April/May. No cracks anywhere else on the building, just the front elevation :( Painter has said he can address these but I'm in two minds as to whether I proceed with this or chip off the render and start again. Some have said that it should have been meshed, which it wasn't. Any tips or recommendations very welcome. Thanks!
James
View attachment 52224
Click to expand...
Plus your side bit that ain’t rendered looks like it’s been built with thermolite blocks I wouldn’t like to render on top of that with sand and cement anyway , way to much suction you’d be better off with a silicone based render
 
As a minimum should be meshed at stress corners of windows








Thermalites lol
 
Can someone explain to me why general public, builders, developers spend a fortune on land and building the house and then the most important step to make it look good corners are cut? Will never understand it.
 
FreeD said:
Can someone explain to me why general public, builders, developers spend a fortune on land and building the house and then the most important step to make it look good corners are cut? Will never understand it.
Click to expand...
Cause the fancy telly more important in cinema room
 
Ritch said:
Plus your side bit that ain’t rendered looks like it’s been built with thermolite blocks I wouldn’t like to render on top of that with sand and cement anyway , way to much suction you’d be better off with a silicone based render
Click to expand...
Side bit will be stone cladding.
 
FreeD said:
Can someone explain to me why general public, builders, developers spend a fortune on land and building the house and then the most important step to make it look good corners are cut? Will never understand it.
Click to expand...
No intention whatsoever to cut corners?! Own land and simply opted for a local plasterer who was recommended to me.
 
Borris123 said:
Hi everyone,

I'm looking for advice on hairline cracks that have developed recently on my new build. The attached photo shows a crack running from top left of ground floor window to corner of first floor sill above it. This is on the front elevation and an almost identical crack pattern has developed on the opposite end of the elevation between two similar windows (I've included a picture of the full elevation for some perspective). The house was plastered in August 2019 but the cracks only became evident during the very warm dry spell we had during lockdown in April/May. No cracks anywhere else on the building, just the front elevation :( Painter has said he can address these but I'm in two minds as to whether I proceed with this or chip off the render and start again. Some have said that it should have been meshed, which it wasn't. Any tips or recommendations very welcome. Thanks!
James
View attachment 52224
Click to expand...
That is truly horrific.
 
Borris123 said:
Thanks Kasper. There's still a lot of fill to go onto the site so where the render currently finishes will be well below the finished street/footpath level.
Click to expand...

OK, who's set up a second account for a wind up?
 
Borris123 said:
Hi everyone,

I'm looking for advice on hairline cracks that have developed recently on my new build. The attached photo shows a crack running from top left of ground floor window to corner of first floor sill above it. This is on the front elevation and an almost identical crack pattern has developed on the opposite end of the elevation between two similar windows (I've included a picture of the full elevation for some perspective). The house was plastered in August 2019 but the cracks only became evident during the very warm dry spell we had during lockdown in April/May. No cracks anywhere else on the building, just the front elevation :( Painter has said he can address these but I'm in two minds as to whether I proceed with this or chip off the render and start again. Some have said that it should have been meshed, which it wasn't. Any tips or recommendations very welcome. Thanks!
James
View attachment 52224
Click to expand...
Check the cracks and see if the blocks have cracked or just render first !
 
You must log in or register to reply here.

Share this page

Back
Top