Speedskim

Status
Not open for further replies.
dnt need to do anything to break in the blade really mate dnt even round the corners off, we tend to use my one on the pole quite alot nowadays if you havent got the pole attachment i would say its worth getting one:RpS_thumbup:
 
what the bloke whos in the vids........?? no for a starters he lives in kent and im in hertfordshire thats 60 miles appart ****** if i would be driving all that way to work with...........that
 
To be fair 60 miles is not far.Like Beddy said, you have all the gear that Jon was trialing for someone, just seems a coincidence Beddy mentions it and the f\acts add up.
 
what gear is that then?? i havent trialed anything only that trowel that ryan sent out months ago
 
and 60 miles is a bloody long way when you have a gas guzzler like i do i would not be goin that far
 
Thought you did a job for him before, remember that house that he Couldn't finish the one where the Pic of him in his mates car was took lol.
He was on about it on diynotforum aswell.
Was he on he job with you Mate?
 
The Speedskim on the pole, Dom and his mates trialed it for some Geezer, now you use it and sing its praises like Dom did.Seems fishy to me.Also 50 miles really aint that far.

So which part of AJH Plasterers are you.
 
@Nisus yeah years ago he messaged me on diynot asking me to do him a favour and finish some work he couldnt do for some reason but when i got there no one was there the house was no where near ready to be finished and the work that had been done was dog rough so i diddnt want to get envolved in it, turned around and went back home. @kebab king ive always like the speed skim i had a few problems when it very first came out scott sent me new stuff to replace the shite parts and ive still got those bits now. so just because i like something means i work with him?? by that reckoning so do you because you also own a trowel.
i actually work for s.simmons contractors.......we do some work for the clay monster every now and then hes the only person off the forum ive met
 
Last edited by a moderator:
your a bloody wind up jj you know full well i dnt work with them, id be facked if i did:RpS_lol:
 
ahhh but as soon as you asked me if i was on the video i knew it was a wind up, as lee and steve and the likes have me on facebook so they know i look nothing like the fella on the vid
 
but you did start to piss me off:RpS_thumbdn::RpS_lol: throwing them kind of accusations could ruin a mans working career :RpS_crying:
 
haha appart from the not being fat bald a chav with a...............interesting looking missus (trying to be nice)
 
just you wait dannys gonna get a load of abusive messages now haha, thatll be nice for him to come back to
 
Or not quick enough,times have changed old spreads were rough I no I have to sort one or two of there jobs every weekend.if you no what your doing in the first place you would be able to use the speed skim to your advantage and put you ahead of the plaster set thus being able to put more on and make more money. P.s sorry for the rant just completely disagree and before you say it I'm no cowboy ill put my finish against anyone's lol
 
I used a speedskim the other day :-) It was bloody handy for a ceiling and even better for the barrel bits :-)

Danny
 
Tomplasterer1 said:
Or not quick enough,times have changed old spreads were rough I no I have to sort one or two of there jobs every weekend.if you no what your doing in the first place you would be able to use the speed skim to your advantage and put you ahead of the plaster set thus being able to put more on and make more money. P.s sorry for the rant just completely disagree and before you say it I'm no cowboy ill put my finish against anyone's lol
Click to expand...


Welcome to the forum mate
 
Ordered new set of speed skims today 600 and 1200 wooooooooooooohoooooooooo gunna be Rich ill let you all no if I can get anymore than 12 boards on 36m2 can't wait if I can get 3 more per gage that's an extra 18/20 pound a gage. Can anyone tell me how there getting on with it and how it's best used thanks
 
Tomplasterer1 said:
Or not quick enough,times have changed old spreads were rough I no I have to sort one or two of there jobs every weekend.if you no what your doing in the first place you would be able to use the speed skim to your advantage and put you ahead of the plaster set thus being able to put more on and make more money. P.s sorry for the rant just completely disagree and before you say it I'm no cowboy ill put my finish against anyone's lol
Click to expand...

tosser
 
Tomplasterer1 said:
Ordered new set of speed skims today 600 and 1200 wooooooooooooohoooooooooo gunna be Rich ill let you all no if I can get anymore than 12 boards on 36m2 can't wait if I can get 3 more per gage that's an extra 18/20 pound a gage. Can anyone tell me how there getting on with it and how it's best used thanks
Click to expand...

the plaster sets in hour and half ? Am I missing something do you lay on with you're speedskim?
 
You're not missing anything I'm just missing a second coat I mix 2.5 bags in 75ltr bucket dub my joints out as I go wack a load on quick! Lol.then when it's on I clean my bucket and hand board and even my trowel then I flatten with my 16inch trowel,light twitch then second flatten with my 600 speed skim twitch again wet trowel twitch and angels and a final plastic.does that clear things up I use to two coat but prices are tight and to be honest I lay down with the gear on the wall with my first flatten and it comes out just as good but wouldn't advise a plodder to try it haha
 
Status
Not open for further replies.

Share this page

Back
Top