spray caps

[spunky]

What's the difference in spray cap sizes we've got a 16mm that we use and a 10mm dies it make alot of difference were using mono ?

 

[Curry]

Smaller spray cone which gives u smaller bands but thicker.

 

[keithuk]

We do it with a 12mm mate ,not saying it is right

 

[Plasterers1StopShop]

Your best off with the 12 or 14mm Mate. 10mm is normally used when your using a slower speed R/S.

 

[spunky]

Cool chears all

 

[Curry]

We use a 10 or 12 with the Ritmo for mono/render. 14mm for mp75/ hardball

Anyone sprayed mono with the texture gun and high air before? Could you not build up say 3 flat layers which need to hardly be ruled before leaving? Sprayed Parinter a few week backs at 6mm and it was almost level with touching

 

[spunky]

What's a texture gun ? Is it different the skim and mortar guns

 

[22jasper]

We use a 10 or 12 with the Ritmo for mono/render. 14mm for mp75/ hardball

Anyone sprayed mono with the texture gun and high air before? Could you not build up say 3 flat layers which need to hardly be ruled before leaving? Sprayed Parinter a few week backs at 6mm and it was almost level with touching

That's too much hassle... spray and just rule it.... you're overthinking this spray plastering

 

[keithuk]

We use a 10 or 12 with the Ritmo for mono/render. 14mm for mp75/ hardball

Anyone sprayed mono with the texture gun and high air before? Could you not build up say 3 flat layers which need to hardly be ruled before leaving? Sprayed Parinter a few week backs at 6mm and it was almost level with touching

we do 2 coat spray ,but 3 Steve ? my lad would kid my head in mate :RpS_blink:

 

[Curry]

Yer but if it was just spraying not touching it till scratch? I'll have a play

 

[keithuk]

What are you saying ,don,t rule off ?

 

[spunky]

Yer but if it was just spraying not touching it till scratch? I'll have a play

you might get a few joints currier

 

[Curry]

It's strange I'm don't think you would get joints, possibly maybe

 

[technoman]

10mm and 12 mm best for mono 14mm and 16mm for plaster such has hardwall and mp75.

 

[plasterjfe]

10mm and 12 mm best for mono 14mm and 16mm for plaster such has hardwall and mp75.

Why is that les

we use 12 but can you explain the reason for the school. depth ability /etc

 

[technoman]

With plaster being a light weight product the spray caps with a bigger diameter is much better due the the air pressure being able to spray the light product in a nice wide band . So when using render by reducing the diameter it give the air a much better chance the move the heavier product in to a better spray pattern .

 

[spunky]

And thicker I suppose