Spraying Rendaid with a g 4

[keithuk]

Any tips guys on r/s and settings would be a help .thanks

 

[southernmonkey]

sprayed it with both a D4-3 and a D6-3 waters around 300ish not the bet to spray as its a bit sticky but it sprays no problem

 

[keithuk]

Thanks mate for your help :RpS_thumbup:

 

[wiganlad]

Is this like a base coat or Sumter. Av heard it mentioned a few times but ot sure

 

[plasterjfe]

base key/prep coat Lee not for base as in render (fancy SBR slurry coat really)

 

[warriorupnorth]

---

As Stu says Keith it does spray well but spray it wet and be quick ,use an old rotor an stat cos it rips hell out of em, if it does go wet n dry just run a brush over it where its gone a bit flat , if you know what I mean, and sheet up well

 

[keithuk]

---

As Stu says Keith it does spray well but spray it wet and be quick ,use an old rotor an stat cos it rips hell out of em, if it does go wet n dry just run a brush over it where its gone a bit flat , if you know what I mean, and sheet up well

Thanks Paul ,i know what you mean mate :RpS_thumbup:

 

[wiganlad]

base key/prep coat Lee not for base as in render (fancy SBR slurry coat really)[/QUOT to creat a key or kill suction n not build out John ?

 

[plasterjfe]

yes mate

weber spec it for say a key coat onto smooth brick or as a suction control/adhesion promoter on dodgy backgrounds. it goes on tight thats all n you leave it rough or stippled. you can roller it on with a stipple roller for artex

 

[wiganlad]

Messy i assume ?

 

[plasterjfe]

can be and it sticks to everyrthing, mask up good coz it will fk stuff up

 

[Putzmiester]

Yeah it's easy to spray mate as stu said about 300ish never had any probs

 

[keithuk]

Yeah it's easy to spray mate as stu said about 300ish never had any probs

thanks mate :RpS_thumbup:

 

[phiz]

I wouldn't put rend-aid anywhere near my machine! Don't even like it on my trowel. Brilliant kit but messy sticky ****!

 

[keithuk]

I wouldn't put rend-aid anywhere near my machine! Don't even like it on my trowel. Brilliant kit but messy sticky ****!

I spray with mine ...i don,t sleep with it :RpS_biggrin: