Stud wall

[S a plastering]

Hi all got a job to price and its concrete section building was going to put a metal stud in front of it with insulation slabs in-between studs then foil boards would you this will be OK or think it needs something else thanks

 

[Stevieo]

The job to process is a little bit different than the one that you are looking at in the likelihood that you can use steel to stud the boards in place of wooden pieces of timber that can be removed from your wall or two pieces of fabric that can fit into the frame or something like that

 

[S a plastering]

The job to process is a little bit different than the one that you are looking at in the likelihood that you can use steel to stud the boards in place of wooden pieces of timber that can be removed from your wall or two pieces of fabric that can fit into the frame or something like that

Huh

 

[Smudger1]

Maybe leave an inch gap for no contact to concrete skin, vapour barrier, studs, insulation, foil back boards, skim ?

 

[S a plastering]

Maybe leave an inch gap for no contact to concrete skin, vapour barrier, studs, insulation, foil back boards, skim ?

Cheers that's what I was thinking just wanted to be sure nice one mate

 

[Dollar]

Stud insulated@ phenolic /vapour barrier @PB ….

 

[Dollar]

Stud insulated@ phenolic /vapour barrier @PB ….

View attachment 77025

In fact I have not reAd replies

 

[S a plastering]

Stud insulated@ phenolic /vapour barrier @PB ….

View attachment 77025

Cheers pal

 

[themucky1]

Gypline would be better than a metal stud I’d have thought and more cost effective, insulate, vapour barrier boats and skim

 

[S a plastering]

Gypline would be better than a metal stud I’d have thought and more cost effective, insulate, vapour barrier boats and skim

Good shout mate but it's fixing the gypliner brackets to concrete there not very thick so might go right through to outside

 

[themucky1]

Good shout mate but it's fixing the gypliner brackets to concrete there not very thick so might go right through to outside

40mm knock ins

 

[S a plastering]

40mm knock ins

I'll get some of them cheers