Suspect trowel

[essexandy]

Carbons just bung in a mixing bucket full of water every night no f**k**g about with it ever

I've been doing this every day since you mentioned it a while back, great idea. Easier than the rag and WD I used to use.

 

[Gibbo]

I put all my tools in one hawk twitch gauges brushes the lot

 

[John j]

Just stuck it on ebay two views I never 30 seconds

 

[reeves1985]

Just stuck it on ebay two views I never 30 seconds

They were your own

 

[jamesthefirst]

I've been doing this every day since you mentioned it a while back, great idea. Easier than the rag and WD I used to use.

Trouble is when you go onto next job the water goes everywhere in back of van!

 

[Arti]

Got this tip off Beddy for getting slight be

nds out. Just don't hit the tang too hard

 

[johnzo]

Had a carbon mt for a while now. Still can't finish with it thiugh its had a fair bit of hammer. Just noticed today the blade bends inwards, towards wall rather then away. Does it want some more hammer or is it f**k*d. Never noticed it before

does it say drywall trowel in it ,i had one a 16x4 1/2 that had a curve towards the wall not on the length but the width i googled it and it turns out its main purpose is for coating drywall joints .that said i did manage to bend it back took a bit of work and nearly broke it .its had 6 months on sand and cement and finally is making a good skimming trowel