The longest day of my life

And I doubt I’ll take on jobs from the forum anymore tbh, that’s one blow to many for me and not happy wit it.
 
I don't buy it you ain't had a spat with the guy why would you not of gotten to this point without it been put on the forum! I don't believe anyone would be like that that's regular on here without a real grievance towards the other person! But as far as I can see you have done everything to try remedy it and haven't ignored him. Don't believe it sorry (y) good though be nice when you put the pictures up of the good job you both done:D nice try fellas!
 
The longest day of my life
 
smoother09 said:
I don't buy it you ain't had a spat with the guy why would you not of gotten to this point without it been put on the forum! I don't believe anyone would be like that that's regular on here without a real grievance towards the other person! But as far as I can see you have done everything to try remedy it and haven't ignored him. Don't believe it sorry (y) good though be nice when you put the pictures up of the good job you both done:D nice try fellas!
Click to expand...
I think it was more or less what I said during the day . It’s alright now after we slept we managed tune it down a bit and I think it’s a good start. It’s funny as I went to help ffs
 
vfr12 said:
Spoke with big bish and we agreed for another day for me to make it up to him.
Wall is still to be seen how bad it is as the customer has raised questions already. Will know more on Monday, but determined to make it right to him. Everyone has bad days in the office and i can’t blame the guy tbh. I can only imagine where his head is at the moment.
Click to expand...


little astronaut in the making here mate (y)
The longest day of my life
 
smoother09 said:
I don't buy it you ain't had a spat with the guy why would you not of gotten to this point without it been put on the forum! I don't believe anyone would be like that that's regular on here without a real grievance towards the other person! But as far as I can see you have done everything to try remedy it and haven't ignored him. Don't believe it sorry (y) good though be nice when you put the pictures up of the good job you both done:D nice try fellas!
Click to expand...

This. Not even a nice try, too obvious
 
Bloody flat tyre found the screw that's parking to close to f**k**g skip's on job dirty f**k**g wankers! Put a bigger screw in caked with aroldite that will give me a day or two ain't got time for that s**t in the morning! Grrrrrrrr!
 
Everything I said was true about @vrf12 , well almost...

He turned up 10 minutes late, wouldnt use accelerator, trowelled up the wall. Ive never seen any thing like it..

What a great finish, showed me a thing or two and worked tirelessly to get my work completed, regardless of the fact it was pushing midnight.

Top top bloke and weve both enjoyed the wind up.

:LOL::bailando::lol:
 
BigBish said:
Everything I said was true about @vrf12 , well almost...

He turned up 10 minutes late, wouldnt use accelerator, trowelled up the wall. Ive never seen any thing like it..

What a great finish, showed me a thing or two and worked tirelessly to get my work completed, regardless of the fact it was pushing midnight.

Top top bloke and weve both enjoyed the wind up.

:LOL::bailando::lol:
Click to expand...

And we’ve enjoyed you thinking we believed it lol
 
BigBish said:
Everything I said was true about @vrf12 , well almost...

He turned up 10 minutes late, wouldnt use accelerator, trowelled up the wall. Ive never seen any thing like it..

What a great finish, showed me a thing or two and worked tirelessly to get my work completed, regardless of the fact it was pushing midnight.

Top top bloke and weve both enjoyed the wind up.

:LOL::bailando::lol:
Click to expand...
Yes! I was onto you from the start!
 
The relying on the random guy you've never met to bring the diesel for the genie and letting him mix up was the downfall to the story
 
BigBish said:
Everything I said was true about @vrf12 , well almost...

He turned up 10 minutes late, wouldnt use accelerator, trowelled up the wall. Ive never seen any thing like it..

What a great finish, showed me a thing or two and worked tirelessly to get my work completed, regardless of the fact it was pushing midnight.

Top top bloke and weve both enjoyed the wind up.

:LOL::bailando::lol:
Click to expand...
Well, you ruined it you c**t! Told to leave it to run for a few months ffs! And although I must admit with most of it I don’t agree with enjoying the banter, there wasn’t any ffs.
Anyway, what big bish is not saying is we went through every single possible problem you can run into on a job. He had to go to the petrol station just to be on the safe side. The only thing that performed flawlessly was the machine. We started spraying and all of a sudden colour change- the supplier mixed two different colours on the same pallet! You cant make this s**t up, so you know what follows . And yes, it was big bish ‘s job so he was in charge, but the guy is not bossy or anything like this and takes opinions and suggestions on board, never told me do this or do that! Always- what do you think? So midday we had to change approach and technics in order to get a good results as we faced factors out of our control.The gear was completely new to me , never used it before, but in this case ,for big bish to as I don’t use accelerators for warriors reasons, so, we had adopt. Setting times were all over the place. From not able to I bar it to stone hard in literally minutes.I was shocked, but I know now how to tackle it next time.
And his labourer quit just before midnight, that’s true to. What amazed me tho- his determination. We all know you can’t expect much from young lads, but I think big bish hit the nail on the head with him. Despite the s**t day we had some proper laughter through the night and we all knew what we were doing and what the aim is- 100% customer satisfaction, no matter what. Just heard from big bish and the customer is extremely happy and said he hasn’t seen a finish like this, but he never saw midnight finish either lol.
Towards the end of the day the customer approached me and asked me why my light is on ? I didn’t understand what he ment until he pointed at the light on the roof of my van . Somehow I managed to flip the switch and the beacon was on all day, what a moron I was.Battery dead and there was midnight push to get me home. All I can say is you have to do what you have to do and in situations like this you need to be around people like big bish and his boy, makes it team work and easy to overcome all problems.
Cheers mate and say to young J thanks , and send him my regards.
 
zombie said:
I'm so disappointed!!!!!
Click to expand...
Bored c**t! I wanted to make your day and I was sure many was about to jump on the wagon! This place has become boring recently and can understand you completely. Needed some spicing up, but ..... there are still some sharp minds left on here. That doesn’t change the fact you are a CUNT tho.
 
vfr12 said:
Well, you ruined it you c**t! Told to leave it to run for a few months ffs! And although I must admit with most of it I don’t agree with enjoying the banter, there wasn’t any ffs.
Anyway, what big bish is not saying is we went through every single possible problem you can run into on a job. He had to go to the petrol station just to be on the safe side. The only thing that performed flawlessly was the machine. We started spraying and all of a sudden colour change- the supplier mixed two different colours on the same pallet! You cant make this s**t up, so you know what follows . And yes, it was big bish ‘s job so he was in charge, but the guy is not bossy or anything like this and takes opinions and suggestions on board, never told me do this or do that! Always- what do you think? So midday we had to change approach and technics in order to get a good results as we faced factors out of our control.The gear was completely new to me , never used it before, but in this case ,for big bish to as I don’t use accelerators for warriors reasons, so, we had adopt. Setting times were all over the place. From not able to I bar it to stone hard in literally minutes.I was shocked, but I know now how to tackle it next time.
And his labourer quit just before midnight, that’s true to. What amazed me tho- his determination. We all know you can’t expect much from young lads, but I think big bish hit the nail on the head with him. Despite the s**t day we had some proper laughter through the night and we all knew what we were doing and what the aim is- 100% customer satisfaction, no matter what. Just heard from big bish and the customer is extremely happy and said he hasn’t seen a finish like this, but he never saw midnight finish either lol.
Towards the end of the day the customer approached me and asked me why my light is on ? I didn’t understand what he ment until he pointed at the light on the roof of my van . Somehow I managed to flip the switch and the beacon was on all day, what a moron I was.Battery dead and there was midnight push to get me home. All I can say is you have to do what you have to do and in situations like this you need to be around people like big bish and his boy, makes it team work and easy to overcome all problems.
Cheers mate and say to young J thanks , and send him my regards.
Click to expand...
Unless this is the shitest wind up ever how can you finish a job at midnight, in the dark bar I'm guessing a few lights. The customers going to be back on here in a few weeks asking is this an acceptable finish lol
 
Robbo123 said:
Unless this is the shitest wind up ever how can you finish a job at midnight, in the dark bar I'm guessing a few lights. The customers going to be back on here in a few weeks asking is this an acceptable finish lol
Click to expand...
Well, you see , that’s you problem- you haven’t worked with Johnny Foreigner and your mind will never accept it , nor go over it.
As for the customer... we had drinks and teas through the whole day . The last one was just before midnight!
 
vfr12 said:
Bored c**t! I wanted to make your day and I was sure many was about to jump on the wagon! This place has become boring recently and can understand you completely. Needed some spicing up, but ..... there are still some sharp minds left on here. That doesn’t change the fact you are a CUNT tho.
Click to expand...
Give big knob on
Robbo123 said:
Unless this is the shitest wind up ever how can you finish a job at midnight, in the dark bar I'm guessing a few lights. The customers going to be back on here in a few weeks asking is this an acceptable finish lol
Click to expand...
vfr12 said:
Bored c**t! I wanted to make your day and I was sure many was about to jump on the wagon! This place has become boring recently and can understand you completely. Needed some spicing up, but ..... there are still some sharp minds left on here. That doesn’t change the fact you are a CUNT tho.
Click to expand...
Give big knob one for all on here, and give yourself one too , bummers :cool:
 
Robbo123 said:
The relying on the random guy you've never met to bring the diesel for the genie and letting him mix up was the downfall to the story
Click to expand...
Who do you call random guy ?
I don’t mix , I spray, and my gene doesn’t run on diesel!
 
You must log in or register to reply here.

Share this page

Back
Top