the machine

[the razzler]

can any one recommend the best rendering machines my heads razzeld looking thru them all

 

[Plasterers1StopShop]

can any one recommend the best rendering machines my heads razzeld looking thru them all

The Razzler is razzeld!

If you need any help, I’m happy to discuss all options over the phone and offer advise where I can

 

[Marshy]

can any one recommend the best rendering machines my heads razzeld looking thru them all

Great customer service from @Plasterers1StopShop too mate

 

[theclemo]

It all depends on the work u do. For what u go for.

 

[Vincey]

I seen a diesel one the other day , throwing it on thicker than I could believe, I’d go for one of them £20,000 ish

 

[Marshy]

I seen a diesel one the other day , throwing it on thicker than I could believe, I’d go for one of them £20,000 ish

They kick arse and pump much further than any electric machine

 

[Rst1983]

can any one recommend the best rendering machines my heads razzeld looking thru them all

We have the mtec 330 from 1 stop,only used it for mono and ocr but been reliable and low running cost.maybe try hiring one for a job n see how u get on.

 

[Dropsalot]

I’d advise a blue one as it’s a nice colour.
You’re welcome.

 

[Marshy]

We have the mtec 330 from 1 stop,only used it for mono and ocr but been reliable and low running cost.maybe try hiring one for a job n see how u get on.

Plus guaranteed back up from @Plasterers1StopShop

 

[Plasterers1StopShop]

I seen a diesel one the other day , throwing it on thicker than I could believe, I’d go for one of them £20,000 ish

We had a new diesel machine go out today, check this beauty out

https://mobile.twitter.com/pftcentral/status/926496459645648896

 

[Plasterers1StopShop]

Plus guaranteed back up from @Plasterers1StopShop

Cheers Marshy

 

[Marshy]

Cheers Marshy

I only say it like it is mate ..... ere I'm running low on freebies lol

 

[Beenereb4]

Think I need to send Ryan some freebies! I might get a better service then lol

 

[Plasterers1StopShop]

Think I need to send Ryan some freebies! I might get a better service then lol

It’s cause you flirt with CCF! I don’t!

 

[Marshy]

I've got tried and tested with @Plasterers1StopShop That's the difference

 

[theclemo]

We had a new diesel machine go out today, check this beauty out

https://mobile.twitter.com/pftcentral/status/926496459645648896

Bit on the wet side for me. But for a scratch coat perfect. What mm was that spraying at mate.


Diesel is king

 

[Plasterers1StopShop]

Bit on the wet side for me. But for a scratch coat perfect. What mm was that spraying at mate.


Diesel is king

That went on at 15-20mm in some areas at that consistency, especially when we slowed the machine down. We had already sprayed and scraped the material off that wall so it was wet

Can obviously knock it up a lot stiffer than that

 

[theclemo]

That went on at 15-20mm in some areas at that consistency, especially when we slowed the machine down. We had already sprayed and scraped the material off that wall so it was wet

Can obviously knock it up a lot stiffer than that

Animal of a machine

 

[Beenereb4]

It’s cause you flirt with CCF! I don’t!

I don't know what you mean.

 

[Beenereb4]

I've got tried and tested with @Plasterers1StopShop That's the difference

That might be true, I only order the odd roll of sticky tape.

 

[rlcleary1]

can any one recommend the best rendering machines my heads razzeld looking thru them all

Look at what type of work you undertake
Domestic work-small electric machine
Mono/3 phase
Site work a diesel maybe




Sent from my iPhone using Tapatalk