Thinking about getting a machine

[xyzplasterer]

Gear I'm using

Weber Rend Aid
CPI General Purpose
Weber OCR
Weber Cullamix
Weber Pral
K Rend HPX, FT, WP

Will a Ritmo spray all these?

If using a sticky base coat like Rend Aid...can you stop/start the machine e.g while bedding the mesh or does it have to be continuous...and someone follow behind?

 

[keithuk]

Gear I'm using

Weber Rend Aid
CPI General Purpose
Weber OCR
Weber Cullamix
Weber Pral
K Rend HPX, FT, WP

Will a Ritmo spray all these?

If using a sticky base coat like Rend Aid...can you stop/start the machine e.g while bedding the mesh or does it have to be continuous...and someone follow behind?

you can stop /start mate ,i spray and rule off
:RpS_thumbup:

 

[PFTwales]

loads of video on you tube showing the ritmo in use.
if it goes through a machine it will go through a ritmo

 

[technoman]

Don't put k-rend FT through any electric machine it's hand applied render only

 

[Deo]

Hi! I am selling a pft monojet! With generator and 30mtr of hose! just serviced! Everything you need and ready to spray.
You can stop start it while bedding your mesh and to rule off. I prefer to have someone on the gun spraying and someone behind but if it's only a small job and you could do without the extra labour then yeah that's no problem.

 

[nickelarse]

deo piss off. your only 2 posts are trying to flog a machine