Tricks & Tips for your Ritmo

[vfr12]

I found washing powder to be best to keep your Ritmo clean. Mix it in a bottle with h2o and some vinegar , apply after you have cleaned your Ritmo and leave it on . It will create protection next time you are using the machine and once sprayed water over it you’ll see all the dirt coming off. Visual difference after 3-4 washes. You don’t need any acids or special treatments. And if you are waiting for your extension like me, make the most of your tub meantime

 

[zolco]

I found washing powder to be best to keep your Ritmo clean. Mix it in a bottle with h2o and some vinegar , apply after you have cleaned your Ritmo and leave it on . It will create protection next time you are using the machine and once sprayed water over it you’ll see all the dirt coming off. Visual difference after 3-4 washes. You don’t need any acids or special treatments. And if you are waiting for your extension like , make the most of your tub
View attachment 19798

I like the tub, or manhole riser what some use cheap and cheerful

 

[Nicm]

Good thinking.

 

[Vincey]

Ahh the xl , I got you mate , I didn't realise before what the difference was

 

[Danny]

I found washing powder to be best to keep your Ritmo clean. Mix it in a bottle with h2o and some vinegar , apply after you have cleaned your Ritmo and leave it on . It will create protection next time you are using the machine and once sprayed water over it you’ll see all the dirt coming off. Visual difference after 3-4 washes. You don’t need any acids or special treatments. And if you are waiting for your extension like me, make the most of your tub meantime
View attachment 19798

quite a good cheap way of a hopper extender

 

[MikeAtthis]

Bathroom lime scale remover ain’t bad either [emoji1303]


Sent from my iPhone using Tapatalk

 

[Rigsby]

Ahh the xl , I got you mate , I didn't realise before what the difference was

Thought it was the xl. A modern version of the monojet.

Can you alter the speed and spray acylics like the L?

 

[Rigsby]

I have a 25 ltr water container cut in half sideways. Then holes drilled to match the hopper grid squares.

Put your bucket coat in the cut down container and the bucket coat drips through the holes lealing your hopper grid plate clean.

I used hot 22mm pipe for creating the holes. The heat makes the holes fluted.

 

[Vincey]

Thought it was the xl. A modern version of the monojet.

Can you alter the speed and spray acylics like the L?

I messed up rigsby when I said xl on the other thread mate, mines an L

 

[Marshy]

I found washing powder to be best to keep your Ritmo clean. Mix it in a bottle with h2o and some vinegar , apply after you have cleaned your Ritmo and leave it on . It will create protection next time you are using the machine and once sprayed water over it you’ll see all the dirt coming off. Visual difference after 3-4 washes. You don’t need any acids or special treatments. And if you are waiting for your extension like me, make the most of your tub meantime
View attachment 19798

@MikeAtthis Is the ritmos guru it's so clean even a nun would lick it's b*ll***s and maybe Mike's too??

 

[MikeAtthis]

@MikeAtthis Is the ritmos guru it's so clean even a nun would lick it's b*ll***s and maybe Mike's too??

[emoji1303]you can’t beat silicone spray to keep it clean


Sent from my iPhone using Tapatalk

 

[PFTwales]

I found washing powder to be best to keep your Ritmo clean. Mix it in a bottle with h2o and some vinegar , apply after you have cleaned your Ritmo and leave it on . It will create protection next time you are using the machine and once sprayed water over it you’ll see all the dirt coming off. Visual difference after 3-4 washes. You don’t need any acids or special treatments. And if you are waiting for your extension like me, make the most of your tub meantime
View attachment 19798

are u using it single phase mode there

 

[vfr12]

are u using it single phase mode there

Yes, no tripping, no problems at all. Sometimes I have 2-3 stops during the whole day , but that’s very rare.

 

[PFTwales]

I use a switchable g4. never have problems with the d63 slimline. one cable for power and 1 for water pump and compressor. booom

 

[benbosh]

I found washing powder to be best to keep your Ritmo clean. Mix it in a bottle with h2o and some vinegar , apply after you have cleaned your Ritmo and leave it on . It will create protection next time you are using the machine and once sprayed water over it you’ll see all the dirt coming off. Visual difference after 3-4 washes. You don’t need any acids or special treatments. And if you are waiting for your extension like me, make the most of your tub meantime
View attachment 19798

I realise this post is 5 years old. What ratio, water, white vinegar and powder do you use?