Trowel edge protectors

[SPREADS]

Anyone use protectors to stop any nicks or chips on your trowel edge.Made some up from a couple of plastic slips.Works quite well.

 

[oasis]

mine seems to be ok i smash it all around the van use it to scrape areas ... smash rad screws with it.. works fine..

 

[PhilPlaster]

I keep mine in the parcel shelf in the van

 

[beddy]

i've thought of using the things they use to keep A4 paper together but its not big enough as my trowels 14inch. i've looked everywhere for some A3 ones but cant find them. my last trowel was always getting nicked and dinked the the van. might be something to do with a dodgy labourer though!

 

[SPREADS]

mine seems to be ok i smash it all around the van use it to scrape areas ... smash rad screws with it.. works fine..

It must be a bullfloat ;D

 

[church]

I use sparkys oval shaped plastic conduet , just run a stanley knife down it and slide your trowel in

 

[beddy]

I use sparkys oval shaped plastic conduet , just run a stanley knife down it and slide your trowel in

thinkin' batman

 

[SPREADS]

I use sparkys oval shaped plastic conduet , just run a stanley knife down it and slide your trowel in

It makes a huge difference. ;D

 

[mistersmooth]

i use a4 paper binders-slide them up towards the front of trowel

 

[church]

I use sparkys oval shaped plastic conduet , just run a stanley knife down it and slide your trowel in

It makes a huge difference. ;D
[/quote

True , but they only come in 2.4 length's so they might not work for the lads with big trowels

 

[Nisus]

I got a rack on the inside of me van i slide all me trowels & hawks into,
don't get knocked at all.
An old spread i know uses the plastic protectors off saws just cuts em to size

 

[roughas]

pipe lagging either side cut an inch longer than trowel and an elastic band to hold em on sorted

 

[pftmonojetman]

Some joiners saws come with a plastic strip on the saw blade there ideal if you can get hold of one

 

[Pug]

I got a rack on the inside of me van i slide all me trowels & hawks into,
don't get knocked at all.

same as

 

[irish_spread]

i just throw them in the bucket, fcuk em

 

[nelly]

i just throw them in the bucket, fcuk em

same as

 

[Render Systems]

I just take care of mine...

 

[Casper]

my nice new marshalltown permashape gets dried off with a towel and sits in the front of the tranny with a pair of shades and the seatbelt on. Aw Precious :-*

 

[simplybesty]

i've thought of using the things they use to keep A4 paper together but its not big enough as my trowels 14inch. i've looked everywhere for some A3 ones but cant find them. my last trowel was always getting nicked and dinked the the van. might be something to do with a dodgy labourer though!

I think you can get them from shops that sell posters ,

 

[beddy]

i've thought of using the things they use to keep A4 paper together but its not big enough as my trowels 14inch. i've looked everywhere for some A3 ones but cant find them. my last trowel was always getting nicked and dinked the the van. might be something to do with a dodgy labourer though!

I think you can get them from shops that sell posters ,

do you mean places that print posters and business cards and stuff?

 

[kirk johnstone]

i hang mine up in the van and keep an oil stone just in case, also have pleanty of trowels that are all broken in so you can just swap and change