uni-shite review

Olican said:
I did a review of unifinish mark 2 and the set I did went fine , 30 m2 ish scratched 2 bags layed in 1 no problems. Rubbed up lovely. Did I use it again..no. 1 simple reason; I've been plastering nearly 60 years ( I'm 82 now) and have plastered over 10 millions square metres using pva with no comebacks, no failure and no lack of quality issues.i never struggle with timings because of the aforementioned experience. To quote no one in particular "if it ain't broke, always wash your hands before you masterbate "
Click to expand...
That works out at over 450 square meters per day,phhewww
 
Vincey said:
:popcorn:
Suck a duck everyone coming out to play tonight, No holds bar , brilliant still not ever seen a relivant or informative,helpful post yet if you orange man maybe there was on your other username before you became machine don of uk.

and maybe in plaster world could say same about imported trowels that people make noise about hey ?
:popcorn:
Click to expand...
You really take any criticism of unifinish personally don't you lol at the end of the day you like it but others don't, everyone's entitled to an opinion.
 
Sorry Vince but ur deluded fella..I controlled the suction 2day I put 2 coats of pva on the wall so y was it still s**t then? And skimmed the exact same size on gage 2 with multi with 2 coats of pva on wall before hand and was miles better..i.e putting it on,mixing,flattening and trowelling..please can u explain that?
 
Vincey said:
Redoing all noggs they pulled out with my fingers oh and have had to redo boarding around sockets as well this is another checkershite :)lol:) attempt I trying to salvage, kitschy thinks he having a bad day, anyway stuff um! Back to topic :popcorn:
View attachment 14975
Click to expand...


You seem to be insinuating that a plasterer from checkatrade has done that ? I am going to have to respectfully call you a bullshitter again, more made up rubbish.
 
stuart23 said:
You really take any criticism of unifinish personally don't you lol at the end of the day you like it but others don't, everyone's entitled to an opinion.
Click to expand...


That's because it's all on him when they finally pull the plug on it, all the nonsense he has told about it, has back fired, stores are not stocking it that says it all
 
stuart23 said:
You really take any criticism of unifinish personally don't you lol at the end of the day you like it but others don't, everyone's entitled to an opinion.
Click to expand...
I know, it's been ages since we had a unifinish fight though , it's great :bananahappy:

Gordon go play with your knob












On new shitty dewalt crap radio :bailando:
Loser :p
 
Kitchy said:
Sorry Vince but ur deluded fella..I controlled the suction 2day I put 2 coats of pva on the wall so y was it still s**t then? And skimmed the exact same size on gage 2 with multi with 2 coats of pva on wall before hand and was miles better..i.e putting it on,mixing,flattening and trowelling..please can u explain that?
Click to expand...
Kitchen f**k me mate how do I know why you can't handle half a bag of unifinish? And more to the point how come you reskimming your own UNPAinted walls at home , how many years have they had no paint is the question?
:hola:
 
Olican said:
Lol. Take it you didn't like it [emoji26]
Click to expand...
I remember mate it was good vid I like the time checks aswell lol, your scaled down version still on YouTube u certainly slapped it on ,first time all them Nela superflexees came on the market
 
gps said:
That's because it's all on him when they finally pull the plug on it, all the nonsense he has told about it, has back fired, stores are not stocking it that says it all
Click to expand...
I'd still like to give it a go on the jobs where I've got a painted artex ceiling to skim, but no where near me stocks it. The nearest place that does it is in Exeter 20 miles away
 
I used a bag on old painted plaster, had to lay a few bits in that were pulling before I topped with multi but was fine....twas not a ripple in sight by the end...its top bannana over artex
 
Vincey said:
Kitchen f**k me mate how do I know why you can't handle half a bag of unifinish? And more to the point how come you reskimming your own UNPAinted walls at home , how many years have they had no paint is the question?
:hola:
Click to expand...
Give ur head a shake vince
 
I like the latexy feel of it...or gluey how ever you want to call it
 
Best thing all round is if they teach all the new blood coming through college to just use unifinish then all this moaning wouldn't happen , 5-10 years from now all the new blood would just flick by a thread like this and think what f**k is this old t**t on about .

The futures bright the futures unifinish and pure but I not go there cuz most don't know what I'm on about.

Happy rolling, I off to the other thread now about crap pva
:numberone:

And ripples from flexing :p whatever that is
 
Vincey said:
Best thing all round is if they teach all the new blood coming through college to just use unifinish then all this moaning wouldn't happen , 5-10 years from now all the new blood would just flick by a thread like this and think what f**k is this old t**t on about .

The futures bright the futures unifinish and pure but I not go there cuz most don't know what I'm on about.

Happy rolling, I off to the other thread now about crap pva
:numberone:

And ripples from flexing :p whatever that is
Click to expand...
.by that time every spread will be Bg certified....the future is certified :rolleyes::rolleyes:
 
Vincey said:
Best thing all round is if they teach all the new blood coming through college to just use unifinish then all this moaning wouldn't happen , 5-10 years from now all the new blood would just flick by a thread like this and think what f**k is this old t**t on about .

The futures bright the futures unifinish and pure but I not go there cuz most don't know what I'm on about.

Happy rolling, I off to the other thread now about crap pva
:numberone:

And ripples from flexing :p whatever that is
Click to expand...


Why ?? Even if some wanted to use no one stocks it pmsl. Not even Travis's main depot in Northampton have it
 
Who was it that suggested they replace multi with it?
Was it flynnyman?
If they did that we wouldn't have these debates as we'd have no choice but to use it like we have to with multi!


Sent from my iPhone using Tapatalk
 
Vincey said:
Redoing all noggs they pulled out with my fingers oh and have had to redo boarding around sockets as well this is another checkershite :)lol:) attempt I trying to salvage, kitschy thinks he having a bad day, anyway stuff um! Back to topic :popcorn:
View attachment 14975
Click to expand...
How are you going to get any gear over that bottom left chase...if you can call it a chase! Fookin sparks
 
Vincey said:
Redoing all noggs they pulled out with my fingers oh and have had to redo boarding around sockets as well this is another checkershite :)lol:) attempt I trying to salvage, kitschy thinks he having a bad day, anyway stuff um! Back to topic :popcorn:
View attachment 14975
Click to expand...
What wrong with it?
Just mix up 1st coat a little thicker jobs a good un.......
Mountains and molehills spring to mind.....
[emoji23] [emoji23] [emoji23] [emoji1] [emoji1] [emoji12]

Sent from my SM-G930F using Tapatalk
 
Vincey said:
:popcorn:
Suck a duck everyone coming out to play tonight, No holds bar , brilliant still not ever seen a relivant or informative,helpful post yet if you orange man maybe there was on your other username before you became machine don of uk.

and maybe in plaster world could say same about imported trowels that people make noise about hey ?
:popcorn:
Click to expand...

[emoji106]


Sent from my iPhone using Tapatalk
 
Difficult gear.i hated it,but tried and tried to see if it worked.
Its a big learning curve ,i use it as base coat then top it with multi.
Cost not a issue passed on to customer.
It saves time when mastered.
The finish on its own i don't like.
I do know why most don't like it.
Took me at least 5 separate jobs to see it can work.most spreads will not give it time.i know why.
 
Donzo said:
Difficult gear.i hated it,but tried and tried to see if it worked.
Its a big learning curve ,i use it as base coat then top it with multi.
Cost not a issue passed on to customer.
It saves time when mastered.
The finish on its own i don't like.
I do know why most don't like it.
Took me at least 5 separate jobs to see it can work.most spreads will not give it time.i know why.
Click to expand...
If you passed that extra cost onto customer could you not still pass on the extra cost but use multi for both coats and have the extra in your pocket?
 
stuart23 said:
Per bag, say you use 6 bags then that's £30 in my back pocket.
Click to expand...
And less grief into the bargain:rayos:.....









Unless it's tiles.. or shineypaint(y)
Even if it's artex..it don't make no difference... loads of people have said." oh it's great over artex".. Yeh if it's been painted with silk paint,..if it's matt or not painted at all,unifinish really ain't your friend.
Only useful for low suction..but even then I probably wouldnt bother my arse with it:endesacuerdo:
 
Are silky surfaces really a problem? Been pvaing them for years and never had a call back from anything that uni wouldn't work on. Did actually want to try this but 1. No stock 2. 5 pound a bag extra makes it double the cost. If you used it everyday you would be looking into 000s a year. If they replaced multi @£10 a bag. Well that could just open up knauf market.

If they could produce it at a lower price point then yeah I would love to never use pva again. Trouble is like polymer modified tile adhesive (which is awesome) you will probably still end up priming it first.
 
You must log in or register to reply here.

Share this page

Back
Top