Marshy
Private Member
Get a hilti impact driver mate they have 3 torque settings bloody awesomeHilti collated and a makita impact driver for me
Get a hilti impact driver mate they have 3 torque settings bloody awesomeHilti collated and a makita impact driver for me
You will soon get fed up of having a black thumb nail and going back to jobs to fix popped nail heads. Screws are far better as they pull the board to the joists rather than holding it in place like nails do.Serious though there must be one of you lot that can remember what year roughly they kind of stopped being used by everyone tbh I'm thinking I gonna go back to using um don't see the point of forking out for one of these collated and I'm fed up with getting sharp black splinters in my left fingers and thumb.
2002 for me mate I'm only young pup compared to you lotVincey did you ever use jute and cotton scrim or was that before your time . ?
Here endeth the lesson2002 for me mate I'm only young pup compared to you lot
Think I just hate boarding tbh it was getting on my tits yesterday lime dust crap up my nostrils battery got no charge all the time plus my impact driver is knackered then about 3pm yesterday was sitting on stairs s**t everywhere thinking f**k me I either gotta Fork out for new tools and I'm skint or should I just use clouts,Vince Why would you want to use nails lol is beyond me collated screw gun all day all long in my eyes it's a key part of your tool kit once you have used 1 you wont go back to thinking about nails or single screws you can pick 110v ones off flea bay for less than your bucket brush but I would pay the extra and get a hiltI
I had the displeasure of using a makita Impact driver today, I left my Hilti charger at home. Makita was lacking the control the Hilti has. Tomorrow will be a better day.Get a hilti impact driver mate they have 3 torque settings bloody awesome
He's going to get paid to use stuffNothing wrong with the festool collated gun or the syslite duo, treat yourself vince get the pair.
Serious though there must be one of you lot that can remember what year roughly they kind of stopped being used by everyone tbh I'm thinking I gonna go back to using um don't see the point of forking out for one of these collated and I'm fed up with getting sharp black splinters in my left fingers and thumb.
Had a smart arsed agent come to me with a printed sheet, with text highlighted in yellow pen saying 150mm apart, the look on his face when I said "that's nails dickhead" lolIf you go by the book ,our insurance insisted on if you were to use screws for boards they could be at 300 centres if you were to nail boards it had to be at 150 centres,so double nailing ,I'll stick to screws all the same much better job vincey.
Had a smart arsed agent come to me with a printed sheet, with text highlighted in yellow pen saying 150mm apart, the look on his face when I said "that's nails dickhead" lol
I didn't know that I anyways screw 6 inch apart lolHad a smart arsed agent come to me with a printed sheet, with text highlighted in yellow pen saying 150mm apart, the look on his face when I said "that's nails dickhead" lol
Failed joiner pretending to be a site agentLol. Toss his salad, why don't you?
Yeh me too unless I'm feeling generous one either side one in the middle then split it, I must of had ten blokes who could not get that simple formula right.Yer I just put 5 across now unless I need to put more in.
Failed joiner pretending to be a site agent
That's why I sometimes end up with six Coz the big gap looks like there's one missing.Its that simple some fukin tards can't do it!lol
Nope but I do now I've never heard that expression, your always learning xxYou know what I mean.