Your opinion ;-)

[spread1970]

Can cement be added to Carlite bonding without any adverse affects?

 

[johniosaif]

Yes

 

[scottie5]

You mean apart from accelerating the setting time.?

 

[PlasterCraftDundee]

Done it a few times but only on small raggles, never been a problem. Never done it on full walls, mainly because my arms cant move that fast

 

[spread1970]

I know the benefits but I keep getting told that cement will blow the gypsum

 

[bubbles65]

It will flash set, so if there's too much cement in it I reckon it wouldn't bond too well, depending on the mechanical key of the substrate :RpS_thumbup:

 

[raggles]

Depends how quick you want it to go off but a hand full of multi will reduce setting time a bit

 

[spread1970]

Not had any comebacks tbh,but always good to hear some informed opinions.
Cheers

 

[johniosaif]

Not had any comebacks tbh,but always good to hear some informed opinions.
Cheers

Where did you hear these ?

 

[spread1970]

Just being polite ;-)

 

[Danny]

whats a raggles?

 

[Fatarm]

whats a raggles?

Cable Chases dan.:RpS_thumbup:

or a tpf member from sunderland:RpS_biggrin:

 

[Fatarm]

Can cement be added to Carlite bonding without any adverse affects?

Prefer using lime to set it off quicker..if thats what your tryin to do:RpS_unsure:

 

[Jace]

whats a raggles?

we all ask ourselves that everytime he posts:RpS_sneaky:

 

[Danny]

thanks for that

Makes sense

 

[CTPlastering]

Whats wrong with a bit dirty water like ? Free aswell .......

 

[Fatarm]

Right oot the tyne carl:RpS_wink:

 

[Finn]

I know the benefits but I keep getting told that cement will blow the gypsum

Yeh heard that 1 too, never heard or cum across it being blown , done a few bits with it never had ny problems, i like to stick with dirty water

 

[BobbyJack]

Has anyone experimented with mixing other products that do or dont work. Tried m/f with easi fill once to see if it would go off quicker as it was the 20 min quick set stuff. Went the opposite and took an age to go off. It also turned it to a rubbery like substance when on the wall

 

[superspread]

No , might get away with bedding angle beads , otherwise no

 

[CTPlastering]

Right oot the tyne carl:RpS_wink:

Aye sumit like that ...... :RpS_thumbup:

 

[Andy M]

Has anyone experimented with mixing other products that do or dont work. Tried m/f with easi fill once to see if it would go off quicker as it was the 20 min quick set stuff. Went the opposite and took an age to go off. It also turned it to a rubbery like substance when on the wall

Bonding with dab adhesive sets fast as fook.

 

[spread1970]

Mix neat pva into bonding from time to time,goes off like a train

 

[SPREADS]

Mix neat PVA through skim is similar

 

[bubbles65]

Mix neat PVA through skim is similar

Yeah and it's fkin awful to use..... tears like foooook :RpS_crying:

 

[SPREADS]

Just saying ......

 

[bubbles65]

Yeah I know :RpS_unsure:

 

[SPREADS]

Ah no probs bubbles

 

[Frankiethespread]

I've often used bonding with a handle of cement when setting up beads ready to float and set with hardwall and multi in the same day. Never had any problems.

 

[Worthy84]

Lads were adding blue lenor to finish as a retarder for a while. Not sure if it worked but houses smelt nice.

 

[SPREADS]

Lads were adding blue lenor to finish as a retarder for a while. Not sure if it worked but houses smelt nice.

Fluffy cotton or spring fresh ,hmmmmmmm

 

[Worthy84]

Haha cant remember which but it was better than B'O and beer farts

 

[BobbyJack]

Might try some fabreeze. Always liked the smell of fabreeze

 

[SPREADS]

Haha cant remember which but it was better than B'O and beer farts

Lenor or comfort ,,love it ,Yankie candles and the likes .....wooooops wrong page ....wrong site....,,,I think I've being fraped