Search results

Definitely going off faster, I normally do 2nd coat of fresh mix and it goes off good 20 minutes faster. I thought that this time of year it'd hang for ages...

Spec is 15mm minimum thickness to avoid ghosting. Beads on, Rendaid with mesh then top coat. Rendaid itself is part of the spec to make up the 15 mm. If you going over block work you could wet fix the beads to make up the 12/15 mm and its still by the spec. If you had to work with a stop bead...

I literally thought whole day the same 8th round by ko for Fury. I'm probably gonna watch replay tomorrow though as little man will be up at 6.30 lol

I had Citroën before small van 11 plate. I switched to vivaro 17 plate and I love it. Loads more room, false floor at the back and I can slide around 20 sheets of plasterboard underneath, got a hatch for things that are 3m long. Fuel is pretty much the same, around 35/40 mpg, but I also got a...

Lucky you, the only thing I ever found was a dildos under customers bed...

Push bike and meet half way if far or cycle to yours and go from there. They even got these electric scooters now. I used to take a bus to my gaff and when I passed my test drove to his every day.

Rendering on ply is always got its risks of cracking, best option is to use insulation screwed to the ply and then go with silicone system over the top. I personally wouldn't entertain it any other way. Either that or use cladding and problem solved

Do they fit refina too?

Or salts bleeding through

I just had to replace my 11 year old Mt gold permashape, bought the same one again, its the best trowel on the market. It takes time to break it in but once there nothing beats it

So is he on price or day rate ? 2 days for each bedroom seems fair enough to get it too really good standard. What's going on with the fireplace? Why is he dictating how much you should charge if you the owner of the company lol

I love metallica enter sandman, casabian, red hot chilli peppers, green day. Depending on the day, I do like some old trance and club music on Friday afternoons.

Oh and forgot to add, any materials leftover from his jobs are mine as he wants me to take them so making even more profit on private sector

£220 for a builder and getting in direct from customer is not bad at all. I'm earning nearly double that on private jobs, so for a steady income that's a good going imo. His boarding most of the times is bang on, I finish at 1 I still get a whole wage in, plus I get his discounts in merchants...

I got it quite sweet with my builder. Doing lofts £220 direct from customer. Gives me around 60% of my work. Then I'm off to do my own jobs which are obviously better pay. Stress free really. Pick and choose.

That is nuts, why would anybody leave it like this. The guy had no idea whatsoever and the lot needs to come down and start from scratch.

K rend on top of cement boards lol

You got few options, sand and cement like someone mentioned, basecoat with mesh, either rubbed up smooth or with silicone on top or k rend. I'd personally go the silicone way if it was my house but thats just my preference. Id order some samples from different brands like eco rend, ewi, k rend...

You much better off using extra time for that, 1 sachet per bag in first coat and away you go. Saves guessing.

When I moved in to my house a damp patch appeared on one of the walls shortly after moving, went to investigate outside and the mupet from sky nailed the cable to dpc all the way along gable wall, rain was bouncing off and getting inside. f**k**g jokers lol

Mate, its always best to give him a call, arrange to meet up then spark him out. Just kiddin lol, meet up, go with him over everything he's not happy with, don't be cocky etc just have a chat with him like grown ups do, then at least you'll know what's what, he'll be face to face so it'll be...

Put it that way, it'll look better if you pay a decent spread to wack two coats on and flatten it without troweling than if you just go at it and half way through realise you can't do it. Some people will get it after 6 months to acceptable standard, some will take years to learn and still be...

That's why I stopped watching football at all like 3 years ago, one big s**t show. Even player's now days are proper fanny's, much rather watch downhill world cup or mx racing, much more exciting

Thumbs up got crate of polish beer

In all honesty I don't think they can just fix it by slapping top coat on it. The whole thing meant to be flat and corners tidy, as your top coat only gonna be as good as the background. It's bodged and rushed and it's f**k*d unfortunately

Could be damp plasterboard, when plaster applied to it the paper started pulling back, had that once, didn't notice plasterboard being damp on one side. Ended up taking the whole sheet down and replacing it as it'd just sag like s**t. Just a suggestion though. It may also be that he's screws...

Never will I ever consider cruise holiday, would rather stay at home tbf. Glad you enjoyed it though. I kind of get more rest of activity holidays than like seat around the pool holidays for some reason, maybe less time to think about work etc.

I get a lot of jobs through my website, therefore it's all done through online contact application and then it goes to my email. I mean it's easier as I can schedule everything a lot better, if I speak to someone on the phone sometimes I'll forget the day and time we agreed on to look at job...

I always wanted to drive hgvs, if I ever have to stop plastering I'll definitely have that in mind, long hours but money is OK and you get to get away from the missus

Just get mixing bath, f**k all wrong with it, you can always take it out to knock up some hardwall

I got a bonus of being able to see if they viewed the invoice, so no shitty stories "I haven't received it yet " etc. I don't take deposits as I only do domestic and its not worth the hustle, never had issues to be fair with payment, normally you can tell if someone's dodgy c**t. I try not to...

Holy f**k mate, that's rough af, we all had walls in the past that either sucked like cheap hoover and didn't come out as great, but that's far beyond acceptable. I'd definitely not paid him f**k all for that as he just f**k**g destroyed your room instead of making it better. And if this was on...

Uneven background bleeding through, not thick enough if you can feel it when you slide your hand across. Stretch marks lol

So glad I upgraded my van few years back, everyone was talking me out of it. I'd probably get my money back if I wanted to sell it right now

Decent brush, time will tell which one you prefer, so worth buying few different ones

Multifinish inside fireplace is most definitely gonna crack. The pink knauf plasterboard is not fireproof, it meant to delay the fire damage but its not fireproof. Don't use it inside fireplace. You need hetas approved boards...

If you line it up properly and get the nice edges bang on tight then there's no point even plastering it inside. You want hetas approved boards, there's loads of them about, victas do their own range. If you really want it plastered then use the victas plaster but be prepared for a lot of...

I think of scenario, he goes to skim a room covered in distemper, thinking its artex he just puts it on, looks s**t but he trusts his good old 2 day old flexi. Then around 11 o clock ceiling starts bubbling and he doesn't know how that happened. All of that on Monday...

I just switched from sky to talk talk, got the hub but no Internet for the past 2 weeks, but they managed to send the first bill wankers

Bg tape is the stuff you want, it's orange and that's my preferred stuff, don't buy p1stopshop tape, it's shite. What you want is different sizes really as I prefer 4inch for corners and 2 inch for joints

Jaspercrackhead.uk.com.net if anything

I'd suggest investing in a proper website, with uk or com domain. Once you got that you can set up your Google account and analytics. A lot of people won't trust some random company with dave@btsport email and no website and only mobile phone. I mean its worth spending some money to get it...

Ah sorry mate didn't read it all

Oh and mate, be careful with these boards, they snap really easy, one tap or even if you cutting it on bench and it'll snap, I used them few months ago, specified by log burner installer, I snapped one luckily I could use it on the sides as its £120 a sheet

You want flexible tile adhesive and do s**t loads of small dabs, not massive ones and then just level off as normal.

https://uk.mous.co/collections/phone-cases?gclid=CjwKCAiAleOeBhBdEiwAfgmXf165MoiI8NmFLwSHHnlDlX3Ogrn34YG2i_QXM0oK4DPp-9I9nJhBfxoC9RYQAvD_BwE That's by far the best phone case I've seen, they literally tried to break expensive phones in multiple ways and not even a scratch. I'd give it a go if...

9 amp definitely, had mine few months and love it, saved my ass few times too (sparky turning electrics off)

Thanks guys for the info. I already contacted course centre in Gloucester so might be able to do it soonish. I do like to challenge myself every now and then, even if nothing comes out of it at the end it might be beneficial for something else, I got pretty bored now of just plastering, so I do...

Thanks @Tinytom very informative reply. How long did your course take and how much was it mate if you don't mind asking. I got few ideas for how to grow it to get more customers, I got pretty well established around my area, a lot of cotswold villages with plenty of old cottages so I'm sure...

Hi, I recently thought of changing direction or adding new skill set to my portfolio and was thinking of starting to actually install the log burners from scratch. I'm thinking of doing a hetas h003 certificate. Anyone here is doing this sort of thing? I've done shed loads of fireplaces this...