A stairwell to float and set..

[johniosaif]

 

[johniosaif]

It will be eml'd by the time I get there..

 

[user__removed]

Nice and easy with a plaziflex, that is about all they are good for twisted stuff.

 

[user__removed]

6mm contour board will go round that nicely, 2 layers and skim happy days.

 

[superspread]

It will be eml'd by the time I get there..

Give me a shout john if you can't handle it mate ;-)

 

[kgreigh]

That will be a nice job to do mate,something a little out of the ordinary.:RpS_thumbup:

 

[superspread]

Nice and easy with a plaziflex, that is about all they are good for twisted stuff.

How you gonna form the external angle?

 

[user__removed]

Plastic arch bead I would think, you would have to give the flat seamless side a cut here and there though. I think that would work, how would you do it @superspread

 

[johniosaif]

How you gonna form the external angle?

Possible plastic bead, not decided till I'm on site..on the hoof as per

 

[superspread]

Nice and easy with a plaziflex, that is about all they are good for twisted stuff.

Sorry mate to the wrong person:RpS_blushing:

 

[johniosaif]

I may video it for Ss.

 

[superspread]

Plastic arch bead I would think, you would have to give the flat seamless side a cut here and there though. I think that would work, how would you do it @superspread

Like you possibly arch bead or plastic render bead ,bit like johniosaif Id suss it out when I got there,I've done similar with 3mm ply so that would be another option

 

[superspread]

I may video it for Ss.

I'll be marking it out of 10:RpS_biggrin:

 

[user__removed]

10mm Plastic drip bead cut on the fixing edge every 100mm would work perfectly for float and set on that im sure.

 

[Danny]

would like to see it when its done Makes a change from seeing flat(ish) walls and ceilings

 

[superspread]

Can I mark it with you ?

Think we could all give asif a mark out of 10 on here . I might go and and mark it on site I'm sure it will be local to me :RpS_biggrin:

 

[superspread]

10mm Plastic drip bead cut on the fixing edge every 100mm would work perfectly for float and set on that im sure.

But then your going over at least 20mm of flat smooth plastic , then cutting every 100mm you wouldn't get a true sweep (IMO) not sure I'd go that route,

 

[superspread]

Good idea and post pics on here and we all are judges lol

That's a plan then , I've seen his flat stuff so this should be interesting :RpS_laugh:

 

[CTPlastering]

Very curious on the angle finishing like ....... Think i have a way but ill post later lol

 

[superspread]

Very curious on the angle finishing like ....... Think i have a way but ill post later lol

You plaster tease:RpS_lol:

 

[user__removed]

But then your going over at least 20mm of flat smooth plastic , then cutting every 100mm you wouldn't get a true sweep (IMO) not sure I'd go that route,

I dont think you understand and its difficult to explain.
You dont cut the bead into 100mm sections if that is what you are thinking, just the fixing edge.
The bead will then bend and sweep following the shape required.
With the bead being bellcast/drip at 10mm thick you end up with just an edge of bead showing as though it is a corner bead.
I dont understand the 20mm part you mentioned.

 

[johniosaif]

Think we could all give asif a mark out of 10 on here . I might go and and mark it on site I'm sure it will be local to me :RpS_biggrin:

Brondesbury park

 

[superspread]

Brondesbury park

Fxxk that then :RpS_laugh:

 

[superspread]

I dont think you understand and its difficult to explain.
You dont cut the bead into 100mm sections if that is what you are thinking, just the fixing edge.
The bead will then bend and sweep following the shape required.
With the bead being bellcast/drip at 10mm thick you end up with just an edge of bead showing as though it is a corner bead.
I dont understand the 20mm part you mentioned.

Are you talking drip bead or stop bead

 

[user__removed]

Really!!

 

[johniosaif]

Wind up alert.....

 

[CTPlastering]

I still think a bead will distort like ......

 

[superspread]

Really!!

I don't know what your going on about :RpS_laugh: but it won't work :RpS_laugh:

 

[malc]

It will be eml'd by the time I get there..

i would not eml but would have used british gypsums glassrok f. i would have used plastic arch beads for the external. i would have been on my way home before you have got the setting coat on!

 

[user__removed]

Will

 

[johniosaif]

i would not eml but would have used british gypsums glassrok f. i would have used plastic arch beads for the external. i would have been on my way home before you have got the setting coat on!

Old fashioned I be, float one day set the next.

 

[superspread]

Won't

 

[Carljenk]

Old fashioned I be, float one day set the next.

Bit of dirty water and finish same day

 

[seanlar]

Run it in situ

 

[superspread]

Run it in situ

Thought that myself Sean