BG state multi finish IS suitable to spray

CeeVee said:
What is making me old before my time is physically getting it out of a bucket, jumping up a hop up 1000 times a day and pushing the gear off my handboard and spreading it on the wall. The rest for me is easy.
That's why I bought a machine.
Click to expand...
What machine you got?

Sent from my Nexus 6P using Tapatalk
 
CeeVee said:
What is making me old before my time is physically getting it out of a bucket, jumping up a hop up 1000 times a day and pushing the gear off my handboard and spreading it on the wall. The rest for me is easy.
That's why I bought a machine.
Click to expand...
Have u sprayed with it? Do u work on ur own? Surely u can still bang 60m2 a day on by ursen and even that's £180 @ £3m2..
 
Kitchy said:
Have u sprayed with it? Do u work on ur own? Surely u can still bang 60m2 a day on by ursen and even that's £180 @ £3m2..
Click to expand...
I can mate...but...I need it to be easier!
Theres two of us and I got an eze to make life easier not get more gear on. It's a five minute set up and a ten minute clean up.
If I get even lazier I'll get a mixing unit for it...
Of course then it comes in very handy for mono. ...
 
When you own a machine the thought of using a hawk and spot board seems ridiculous!!!
I was watching some guys rendering the other day and they we're scooping the gear out of a bucket onto there Hawks
This was on a big gable end!!!
Fook that.there backs will be knackered in a few years time
 
bobby said:
When you own a machine the thought of using a hawk and spot board seems ridiculous!!!
I was watching some guys rendering the other day and they we're scooping the gear out of a bucket onto there Hawks
This was on a big gable end!!!
Fook that.there backs will be knackered in a few years time
Click to expand...
That's rendering tho bobby..id have a machine if I skimmed every day and that's all I did but I dnt just skim thank fck cudnt think of owt worse than just skimming..
 
Priceplastering said:
I own two machines already and the next will be an airless possibly the swing.
My intentions are too take the painters work away from them not the other way round besides it's called airless plastering.
I've spoke to my contacts about taking the mist coating on, reason being is any filling will be rectified whilst we are there so no arguments over that, everyone I've spoke to is up for it.
No brainer for me.
Click to expand...

Mist coat only ? Painting with airless is no no on site
 
That's bolloxs as loads of sites ive been on painters have sprayed..massive student appartments in Bradford 2 years ago,nursing home in Halifax and a load of appartments on another job to name a few..every room gets cleaned out then once sprayers are in nobody's getting bk in that room all taped off are the doorways etc
 
I used to have an airless paint sprayer until it died in last years floods. The finish is flawless! Far superior to a roller. Airless plaster then airless paint would be hell of a combination.
 
Rossi46 said:
I used to have an airless paint sprayer until it died in last years floods. The finish is flawless! Far superior to a roller. Airless plaster then airless paint would be hell of a combination.
Click to expand...
Airless paint Is class..goes to show really as it must be painters with there rollers that make it look s**t sometimes
 
No man on this earth can spread multi quicker by hand.
I'm working towards throwing my hawk away for good cos the day will come when machines take over, then all the handballers will be long gone wishing they'd got on it as well.
Could be what the trade needs as chancers ain't going to lay out for machines.
 
vfr12 said:
Just for the record........never saw anyone in London spraying paint. I was wondering too, why, but now you know . It might be the paint or something else, but painters are allowed to use airless only when mistcoating.
Click to expand...
Well there spray it in sunny Yorkshire seen it with me own eyes..i know some have sprayed ceilings to a finish,sprayed mis coat then used roller on the walls,another job was fully done with the sprayer..not 1 roller touched the job
 
I first used airless for paint ten years ago it's great on big jobs, don't see point of it on one room domestic tho.
They can't be beaten for speed and quality in my opinion.

Sent from my Nexus 6P using Tapatalk
 
zolco said:
I first used airless for paint ten years ago it's great on big jobs, don't see point of it on one room domestic tho.
They can't be beaten for speed and quality in my opinion.

Sent from my Nexus 6P using Tapatalk
Click to expand...
Its made for big site jobs
 
zolco said:
I first used airless for paint ten years ago it's great on big jobs, don't see point of it on one room domestic tho.
They can't be beaten for speed and quality in my opinion.

Sent from my Nexus 6P using Tapatalk
Click to expand...
I bought mine about 8 years ago when i was over skimming a lot of full houses. Offered to finish ceilings and mist coat walls. Most went for it (y) didn't want to get involved with all that cutting in shite
 
Priceplastering said:
No man on this earth can spread multi quicker by hand.
I'm working towards throwing my hawk away for good cos the day will come when machines take over, then all the handballers will be long gone wishing they'd got on it as well.
Could be what the trade needs as chancers ain't going to lay out for machines.
Click to expand...
Do you spray multi mate?
 
Tbh I can't remember the last time I used multi.The last full house we used mp which we sprayed the bulk of and handballed the rest.
Mostly busy with render and small extensions which don't warrant spraying.
 
Hi all, thanks for your comments on this.

We do not recommend spray application with Thistle MultiFinish for a number of reasons. When tested, we have seen over shelling off the wall and excessive cracking. We also have concerns that Thistle MultiFinish could clog machine feeds.

That said, we do appreciate the views expressed here, and could be willing to make some site visits to see how the product is being used in spray application.
 
You must log in or register to reply here.
Back
Top