Exterior pre grit - bondit

[Plastering&rendering]

Any one used this on re skims for dry old walls? Or recommend anything similar? Most pva seems to be dog s**t lately

 

[S a plastering]

I've used rendergrip inside it was pretty good

 

[Sitemonkey]

Any one used this on re skims for dry old walls? Or recommend anything similar? Most pva seems to be dog s**t lately

Why don't you use the Interior grit bostic ect ??

 

[malc]

I have noticed that on some pots of PVA they state that it should be used neat. On others still state add water.
I have not had a problem with PVA on very dry walls it does need 2 decent coats.

 

[Plastering&rendering]

Why don't you use the Interior grit bostic ect ??

Is bostik good for high suction? I’m looking for something I can get the labourer to wollop on in one coat. A lot of the pva seems to be watered down from the tub and the price of it has gone up.

 

[Sitemonkey]

Is bostik good for high suction? I’m looking for something I can get the labourer to wollop on in one coat. A lot of the pva seems to be watered down from the tub and the price of it has gone up.

Yes all grit is good for high suction. Never have problems with pva or grit . Cheap pva is wank especially that shite no nonsense it's like fukin milk . Buy a decent pva 2 coats you'll be fine

 

[Stewie03]

As @malc has said two generous coats on very dry walls will you be ok never had a problem

 

[theshed]

Any one used this on re skims for dry old walls? Or recommend anything similar? Most pva seems to be dog s**t lately

For old dry walls, coat of sbr then pva straight over the top. Takes minutes.