Mixing drill

Status
Not open for further replies.
There's a belle plaster mixer on eBay 2hours to go ,£75 ATM,might be worth a look for someone even as a spare,
 
SpankySouthport said:
Got a 160 pozzi with it, reckon I should get a negative one? Don't reckon I need a 180 lol
Click to expand...

was told i had to spend some money on tools this week so guess what i just bought as well :RpS_thumbup:
Have you read the book cos it says in there not to use a paddle with a dia larger than 160mm !would imagine larger paddle might over work the motor ?
 
raggles said:
was told i had to spend some money on tools this week so guess what i just bought as well :RpS_thumbup:
Have you read the book cos it says in there not to use a paddle with a dia larger than 160mm !would imagine larger paddle might over work the motor ?
Click to expand...

All I seem to do lately is spend money on tools..

havent read the book no probably never would have so thanks for that :RpS_thumbup:
@jrplastering have you got the alfra one or refina?

havent even used mine yet! Walked in to a job after booking it in 3 weeks ago to a stud wall need taking down, 2 sockets running in, wallpaper still on the walls and ceiling (wood chip!!!) the lot!! That's even before I start sound proofing and skimming 3 rooms! Had to push other jobs back and work the weekend to do the fckin thing!!!

dont tell @finefinishwales ;)
 
Last edited by a moderator:
SpankySouthport said:
All I seem to do lately is spend money on tools..

havent read the book no probably never would have so thanks for that :RpS_thumbup:
@jrplastering have you got the alfra one or refina?

havent even used mine yet! Walked in to a job after booking it in 3 weeks ago to a stud wall need taking down, 2 sockets running in, wallpaper still on the walls and ceiling (wood chip!!!) the lot!! That's even before I start sound proofing and skimming 3 rooms! Had to push other jobs back and work the weekend to do the fckin thing!!!

dont tell @finefinishwales ;)
Click to expand...
When i drop that much on a tools i always check the books cos it's a lot to drop kick for the sake of a couple of mins reading :RpS_thumbup:
 
we are using a belle mixer now and it does the job well. we do have a refina 1800v and a top of the range bosch both laying dead in the lockup
 
malc said:
we are using a belle mixer now and it does the job well. we do have a refina 1800v and a top of the range bosch both laying dead in the lockup
Click to expand...
I got two Bosch ones serviced recently, working great now, top drill in my opinion.
 
@SpankySouthport i have neither mate i have the eibenstock one which is exactly the same at the refina one but i bought it off them before refina got there little mits on it and stuck there name all over it:RpS_wink:, the refina ones are just bought off eibenstock and put a few refina stickers on it and sell it on for copius amounts of money
 
Last edited by a moderator:
jrplastering said:
@SpankySouthport i have neither mate i have the eibenstock one which is exactly the same at the refina one but i bought it off them before refina got there little mits on it and stuck there name all over it:RpS_wink:, the refina ones are just bought off eibenstock and put a few refina stickers on it and sell it on for copius amounts of money
Click to expand...

Yeah the alfra came stickered up with eibenstoke also but has different handles than refina..
 
Link Removed

this is a belter for half price we got one last week an a few other bits from the seller. got some good deals but the drill's mustard x
 
SpankySouthport said:
Whisk isn't properly straight, should I send it back or they all not quite straight?
Click to expand...

fack the whisk off boy youll wanna get a new one anyway dnt ya? a negative one, or do what andy did and ring to complain saying its not fit for purpose as its positive and bent, i think he got a new negative one out of them
 
jrplastering said:
fack the whisk off boy youll wanna get a new one anyway dnt ya? a negative one, or do what andy did and ring to complain saying its not fit for purpose as its positive and bent, i think he got a new negative one out of them
Click to expand...

Haha sounds like a plan! Worried that its the m14 shaft rather than the whisk what do you reckon? Will ring the fella I got it off and tell him to sort this **** out! Lol
 
spin the whisk in your hand out of the machine obviously youll soon be able to tell if its bent. it might just be off balance, just get rid and get a neg paddle FFS haha you dnt want a positive one anyway
 
wrighty said:
Link Removed

this is a belter for half price we got one last week an a few other bits from the seller. got some good deals but the drill's mustard x
Click to expand...

Good shout! I just got me one of those as a back-up. Thanks mate:RpS_thumbup:
 
Anyone got the eibenstock erz21 twin paddle, I bought one the other day after my mm30 got stolen but can't get on with it (plasters the ceilings for me) gna try it with a paddle out
 
Bennyspreadsmore said:
Anyone got the eibenstock erz21 twin paddle, I bought one the other day after my mm30 got stolen but can't get on with it (plasters the ceilings for me) gna try it with a paddle out
Click to expand...
I was going to get this but because I hadn't heard anything about it was a bit wary so got a mm30 instead.
 
Better choice for skimming, not too terrible with one paddle out, not as good mm30 and it doesn't stand up but should be good for drywall adhesive n that I hope. Looks mean at least haha
 
jesssop said:
They had tgese in are local store earlier this year. Next to the check out they had a returns pile with a few of these on it.
So I wouldent bother
Click to expand...

Yeah, I took my first one back thinking there was a fault. The first three speeds do nothing. The whisk doesn't even turn. It won't even mix air on anything up to speed 4! After that, though, it's spot on. 3 year guarantee for £40...Easier returns than a cheap one off eBay.
 
They last about a year just bring it back and get your money back and buy another, £40 a year for a mixer cant go wrong, bit noisy but do he job
 
When my refina one died I bought the draper 1400 w mixer had it a year now been great sounds like a jet 180 I paid but you can get them for 120 ish now I would by another
 
Status
Not open for further replies.

Share this page

Back
Top