Ox corner trowels

[John j]

Just bought one of these after my mt got crushed in van somehow. Let's just blame labourer. Should I chuck it in bin and get another mt as it seems you have to really push em in to corner to get em square or do they come good

 

[TonyM]

I have one and it’s great for taping.


Sent from my iPhone using Tapatalk

 

[theclemo]

@scottie5 is the ox man on the forum. He even has a tattoo

 

[Nicm]

Just bought one of these after my mt got crushed in van somehow. Let's just blame labourer. Should I chuck it in bin and get another mt as it seems you have to really push em in to corner to get em square or do they come good

I prefer the 90 degree ones.The wider ones will drive you mad leaving a line either side.MT do a 90 degree one.

 

[john c]

Didn't like the ox one I bought either
Best one to buy is the ragni

 

[scottie5]

@scottie5 is the ox man on the forum. He even has a tattoo

BOLL/OX .
I got thrown off there trade stand at tool fair for telling a few people what I thought about the pipe trowels .
Although they've gained alot of credibility getting speedskim on board.

 

[scottie5]

I prefer the 90 degree ones.The wider ones will drive you mad leaving a line either side.MT do a 90 degree one.

.
90deg for me to.

 

[John j]

I prefer the 90 degree ones.The wider ones will drive you mad leaving a line either side.MT do a 90 degree one.

So I learnt took half of fricking skim of . I,ve bent it a bit now but gonna get a mt or ragni as someone said. Only really got it as it was on someone else's account lol

 

[John j]

Didn't like the ox one I bought either
Best one to buy is the ragni

These em
https://www.tool-net.co.uk/p-406457...MI8J-Jl7D91gIVybobCh3PngQiEAQYBSABEgJvR_D_BwE

 

[john c]

Yeah that's the one
Best one I have ever used anyways and doesn't need any breaking in

 

[malc]

These em
https://www.tool-net.co.uk/p-406457...MI8J-Jl7D91gIVybobCh3PngQiEAQYBSABEgJvR_D_BwE

that is a 103 deg. for dry lining. you need a 90 deg. for plastering.

 

[theclemo]

BOLL/OX .
I got a job at there trade stand at tool fair for telling a few people what I thought about the best trowels .
Although they've gained alot of credibility getting speedskim on board.

 

[S a plastering]

it's 103 deg for a purpose to put pressure on the wings so it pushes right into the tapes for tape an fill 90 deg as said for plastering

 

[Nicm]

MT90degree.

 

[john c]

Telling ya lads just try the ragni they are brilliant
Never liked the 103 degree ones but these don't dig in at all
The Mt 90 degree and good as well but need breaking in I find

 

[scottie5]

 

[Cornelius]

I've got the ox internal and external corner trowel the external is pointless I've never used it, got the internal four years ago and it's pretty good I gave it a good bending to get it better and round the corners off, I probably wouldn't buy another though

 

[duke163]

Telling ya lads just try the ragni they are brilliant
Never liked the 103 degree ones but these don't dig in at all
The Mt 90 degree and good as well but need breaking in I find

We use the ragnis , I prefer it to the 90 degree ones . I just pull the internals on the 2nd coat perfect tool for me

 

[John j]

Got a link to these ragni

 

[edgy]

Ragini corner trowels with the curved edges are by far the best Iv ever used


Sent from my iPhone using Tapatalk

 

[duke163]

Got a link to these ragni

https://www.screwfix.com/p/ragni-st...gclsrc=aw.ds&dclid=CN-5wKyk_9YCFQbIUQodyZ4P_A

 

[Dr.B]

A lot naked the mistake of pressing too hard with a corner trowel, I did myself.

 

[Dr.B]

A lot naked the mistake of pressing too hard with a corner trowel, I did myself.

Make not naked, bloody predictive thing!!!

 

[John j]

Make not naked, bloody predictive thing!!!

Them ox you have to press on to get the 90 degree

 

[John j]

https://www.screwfix.com/p/ragni-st...gclsrc=aw.ds&dclid=CN-5wKyk_9YCFQbIUQodyZ4P_A

Cheers i.ll pop to screw fix tomoz

 

[GypsumSnorter]

Aye wee Ragni is the best - rounded corners so less lines

 

[beader]

A lot naked the mistake of pressing too hard with a corner trowel, I did myself.

I like to press my naked self hard against things.

 

[Dr.B]

I like to press my naked self hard against things.

In a corner somewhere too???

 

[John j]

Got one of them ragnis so see how it goes tomoz

 

[John j]

These are mint thanks for heads up

 

[Danny]

I use a corner trowel differently to most... I do it in 2 passes... so only one wing touches on each pass... that way you dont get that horrible ridge that can happen

Not used the ox ones before so cant comment