Plaster and render required on large extension and renovation in Bedfordshire

[markb1001]

I am in the trade and am doing a fairly big project on my own house in near Whipsnade Zoo. It's a bit too much for my regular guy (who I've worked with for over 15 years) to do without compromising our other work.

There's about 200 sq. m of render to do, some of which will be on new EWI (fitted by us) and some on new blockwork.

I don't have much experience of through-coloured renders, on the smaller extensions we do we normally use sand and cement to match the existing, however I have been looking at Monocouche and K-Rend scraped finish.

I'm open to advice as I'm looking for the best product for the job, and also someone to do it.

It should be ready early September.

 

[malc]

you will be better off using render mesh then EML if poss. EML will expand under different weather conditions and crack your rendering.
a render carrier board may be another option.

 

[zolco]

@vfr12 nice little countryside job for you

 

[markb1001]

you will be better off using render mesh then EML if poss. EML will expand under different weather conditions and crack your rendering.
a render carrier board may be another option.

Thanks

 

[vfr12]

@vfr12 nice little countryside job for you

Timing is not good for me unfortunately. Taking my hols from 1st of September till last of September

 

[markb1001]

now looking like mid/late September, possibly in two hits with the second phase mid October

 

[sdspread]

now looking like mid/late September, possibly in two hits with the second phase mid October

hi Mark, are still needing a renderer , I've exp in through colour renders,
based in luton.
steve 07752176705

 

[Rossi46]

hi Mark, are still needing a renderer , I've exp in through colour renders,
based in luton.
steve 07752176705

 

[vfr12]

hi Mark, are still needing a renderer , I've exp in through colour renders,
based in luton.
steve 07752176705

He is looking for experienced member on here, not a regular plasterer. He has one!

 

[sdspread]

He is looking for experienced member on here, not a regular plasterer. He has one!

 

[sdspread]

w
u prat

 

[vfr12]