Render mesh

[carys]

Has any body used this stuff whith sand cement any good??

 

[malc]

i have never tried to place mesh in sand and cement. i would place the mesh in a coat of rend aid or parinter.

 

[Deleted member 32554]

I don't think the holes are large enough and it'll sheet off

 

[Devilfloat]

I've tried it mate years ago and it sags or rolls back down

 

[hollybank]

Builder wanted it in on one wall put into hardwall it was a right pain in the arse.

 

[essexandy]

Well I've done it plenty of times. I do prefer the larger mesh of Parex TV10, but have used both Weber and the cheap generic ones.

 

[Retired Spread]

I use it all the time on internal re-skims onto original where customers don't want to go back to brick.

 

[Squarehead]

I use it all the time on internal re-skims onto original where customers don't want to go back to brick.

Same as that. Also have used in sand and cement top coat, push it on it pushes the big aggregate back and you can rub up f**k**g quick. Zero cracks. Have to put it on wet or forget it. Render mesh on Victorian reskims and all boarding. Rarely use traditional scrim now. Way way less cracking.