Rendering In The Cold

[kgreigh]

yeah was down to 17c here today and only 9c at night brrrrrrr!!!!

Where are you to get that weather this time of year?

 

[A.plasterer]

lol at home on the costa del sol

 

[Smudger1]

Near the coast here so only had 1 day where its been to cold to render outside so far, it warms up by 9am ish then go like the clappers till 2 so can finish up b4 temps drop off.

 

[malc]

Hit a quiet spot /gap coming up next week so took it on,the bricks can't point so I will do it..

i watched a tv program that the last week of jan is the hardest week of the year to earn a living. over spending over christmas and waiting for the jan pay check, that is why the shops have their sales cut this week to try to get some money in.

 

[kgreigh]

lol at home on the costa del sol

Very nice,is that around as low as the temp gets this time of year.?

 

[A.plasterer]

Very nice,is that around as low as the temp gets this time of year.?

Had odd days below 10c during day but can be up around 20c , get around 320 days sunshine a year.

 

[kgreigh]

Had odd days below 10c during day but can be up around 20c , get around 320 days sunshine a year.

You don't fancy doing a work placement swap with me then ?:RpS_laugh:

 

[nickelarse]

Just scrape it back once it's thawed out

 

[A.plasterer]

You don't fancy doing a work placement swap with me then ?:RpS_laugh:

Errrr ummmmm hmmmmmm errrrr??? Ummmmmmm errrrrr ???
NO!!!!!!

 

[Putzmiester]

See you can tell nickelarse is a proper site renderer lol

 

[plasterjfe]

Working down Alderly Edge its about 2 during the day last week. Bit of bead, stand near the fire. Bit of bead, stand nar the fire, bit of bead, stand near the fire.

That's pretty much how my week went. Next week with a little more temp were hoping to spray 2 jobs

 

[johniosaif]

Rendered a garage today ,had scratched it a few weeks ago,solid block scratch 4/1 withouthout waterproofer and put a little Limę in it,had it Floated and sponged at 12.30 .
floated a wall yesterday ,had scratched a couple of weeks ago over ribbed lath which was on brickwork with a membrane between it and the wall ,it pulled in immediately which wasn't the plan, had to wet it to float and sponge each level.

 

[owls]

Working down Alderly Edge its about 2 during the day last week. Bit of bead, stand near the fire. Bit of bead, stand nar the fire, bit of bead, stand near the fire.

That's pretty much how my week went. Next week with a little more temp were hoping to spray 2 jobs

weve had similar last week,
barely got above freezing through day. I spent more time stood next to our blow heater than on the tools.

 

[plasterjfe]

Great tho innit a fire or a blow heater to keep u warm

 

[nickelarse]

Gays

 

[user__removed]

Great tho innit a fire or a blow heater to keep u warm

Get yourself one of those nice makita heated jackets, gotta be worth the wedge for you boys who are outside all winter.

 

[owls]

Great tho innit a fire or a blow heater to keep u warm

just a struggle being a tight yorkshireman paying for the gas bottles :RpS_unsure:

 

[owls]

Get yourself one of those nice makita heated jackets, gotta be worth the wedge for you boys who are outside all winter.

are they any good these? ive never seen anyone with one.

 

[user__removed]

are they any good these? ive never seen anyone with one.

Dunno mate, maybe you could start a new trend. Shame they don't have a hood though.