Ritmo electrocuting me

F

Ftp321

Well-Known Member
It's got to be a common fullt that someone knows the straight answer to
It's been fine until Friday now it's tripping the electric and I'm having to wear Marigold's again, my ear got a shock as well
Someone must have fixed this and know the answer
 
Tom81 said:
It's got to be a common fullt that someone knows the straight answer to
It's been fine until Friday now it's tripping the electric and I'm having to wear Marigold's again, my ear got a shock as well
Someone must have fixed this and know the answer
Click to expand...
Could it be an earthing problem?
Good job it’s not 3 phase lol
 
I used to have a brevile sandwich maker that used to do that! So frustrating Because I do like toastie (y) ham and cheese with worstershire sauce if you was wondering! Gotta be careful they’ll burn your ducking lips off patience required:coffe:
 
i would guess that your machine has a bear wire touching metal. it could be dampness in the plug, cut the plug off and replace.
if you can't solve the problem get the labourer to stand on a rubber mat !
 
smoother09 said:
I used to have a brevile sandwich maker that used to do that! So frustrating Because I do like toastie (y) ham and cheese with worstershire sauce if you was wondering! Gotta be careful they’ll burn your ducking lips off patience required:coffe:
Click to expand...
You should try crispy bacon red Lester brie and red onion chutney
 
malc said:
i would guess that your machine has a bear wire touching metal. it could be dampness in the plug, cut the plug off and replace.
if you can't solve the problem get the labourer to stand on a rubber mat !
Click to expand...
I'll give it a go
I thought it might be a earth leak
 
Tom81 said:
I'll give it a go
I thought it might be a earth leak
Click to expand...

leakage to earth will trip the machine. this would be dampness to your electrics.
you could disconnect the earth from the plug , run the machine to try to dry the electrics out.
 
malc said:
leakage to earth will trip the machine. this would be dampness to your electrics.
you could disconnect the earth from the plug , run the machine to try to dry the electrics out.
Click to expand...
Yes I have done this in the past from your advice on a old thread got me out of s**t a few times,
it stops the tripping problem but still electrocutes me
 
Stevieo said:
@Tom81 have you seen what he said? Are you going to have that?
Click to expand...
What were focking who
Ritmo electrocuting me
 
We have been getting shocks from our machine recently.
Funny thing is this week we have been spraying from generator and no shocks at all? Must be down to earth when plugging in to mains?
 
You must log in or register to reply here.

Share this page

Back
Top