Ritmo m or eze k4

[deanlangan123]

Do you need a separate compressor to use 'spray finish' with a ritmo m with skim setup

 

[Danny]

Do you need a separate compressor to use 'spray finish' with a ritmo m with skim setup

@Plasterers1StopShop

 

[vfr12]

Do you need a separate compressor to use 'spray finish' with a ritmo m with skim setup

Yes,and control cable

 

[essexandy]

Our Ritmo will spray the finish using just the onboard compressor.

 

[theclemo]

Do you need a separate compressor to use 'spray finish' with a ritmo m with skim setup

No

 

[Vincey]

Tbh I’m not sure , if mines an l or an m but I don’t use separate compresser

 

[vfr12]

Our Ritmo will spray the finish using just the onboard compressor.

No

That’s interesting tbh. I would guess it will be not as smooth as it should be , or I am completely wrong?

 

[Wezly]

That’s interesting tbh. I would guess it will be not as smooth as it should be , or I am completely wrong?

More air just atomises the material.

 

[theclemo]

That’s interesting tbh. I would guess it will be not as smooth as it should be , or I am completely wrong?

Go's on no problem. Can use an order compressor to spray a mist. But it's even more overspray. And u have to travel it anyway.

 

[essexandy]

That’s interesting tbh. I would guess it will be not as smooth as it should be , or I am completely wrong?

Couldn't tell you as I've never sprayed so much as a bagful using our Ritmo.

 

[vfr12]

Go's on no problem. Can use an order compressor to spray a mist. But it's even more overspray. And u have to travel it anyway.

Again in english pls



Do you have to trowel it after clemo?

 

[vfr12]

More air just atomises the material.

But less will let you with tyrolian like finish?

 

[Fatarm]

More air just atomises the material.

Fatarm googles atomises...
Word of the week Wezly

 

[essexandy]

But less will let you with tyrolian like finish?

That's exactly how the Thistle Spray Finish is supposed to go on and then spatted over.

 

[vfr12]

That's exactly how the Thistle Spray Finish is supposed to go on and then spatted over.

I was thinking more of silicon bucket finish, like the EWI

 

[deanlangan123]

Does anyone successfully spray finish on on the regular?? Seems most on here have given it a go but sacked it off after w while

 

[essexandy]

I was thinking more of silicon bucket finish, like the EWI

I'm sure I saw a video of either Ian or Stuart spraying that without any extra compressor. I remember that they lined the hopper with a bin bag to save clean-up time.

 

[flynnyman]

Does anyone successfully spray finish on on the regular?? Seems most on here have given it a go but sacked it off after w while

I think @Vincey does it on a regular with multie but maybe I just dreamt it

 

[Vincey]

I think @Vincey does it on a regular with multie but maybe I just dreamt it

Never sprayed multi mate , took me 2 months to clean it all out of my pipes and gun from the guy I got it off

 

[vfr12]

I'm sure I saw a video of either Ian or Stuart spraying that without any extra compressor. I remember that they lined the hopper with a bin bag to save clean-up time.

I have done it with separate compressor, stronger that can keep up with the job -LK402, if I remember right. For plaster and render you use the onboard one, but for bucket finish you need extra 1k+

 

[deanlangan123]

So decided on the ritmo m, as wanted skim setup so needed to keep costs down, it claims to pump 20m, is this true, what kind of heights would it begin to struggle, id never be higher than 8 m?? With mono, cpi