speedskim

[spunky]

Can you remember the vid of the lad with an m100 spraying that cupboard? He was hammering it on everyone else moves like there spraying renders

 

[spunky]

Dave do you one coat?

 

[Dave5o]

Noooooooooooooooooooo

 

[spunky]

I do

 

[Dave5o]

Are you quicker than the machine,

 

[spunky]

no lol

 

[nickelarse]

Can you remember the vid of the lad with an m100 spraying that cupboard? He was hammering it on everyone else moves like there spraying renders

it wasnt hammering it on. he was doing a first coat mist over with s**t loads of air. you can make a ritmo do that if u want. thats what i was saying to currier about doing 2 passes rather than 1 thick slow 1.

 

[spunky]

Do bg advise it though or is it a multi finish thing?

 

[McPlaster]

Ive not spoke to him for a while but he was selling the machine a while back, mtec100. Like ive said in the past i dont think its any quicker on skimmin and lookin at the vids it proves my point.

I love Flynny, Moderator who tells the truth.

 

[flynnyman]

I love Flynny, Moderator who tells the truth.

**** me a compliment they are few and far between

 

[nickelarse]

Do bg advise it though or is it a multi finish thing?

advise what? 2 passes??

 

[Dave5o]

Where do you get an nvq in 1coat skim and machine skim plastering.

 

[flynnyman]

Where do you get an nvq in 1coat skim and machine skim plastering.

When you reach 100 posts on here it will be sent to you

 

[Dave5o]

R crack on then.

 

[Curry]

Them rooms in the Horncastle vid are 280m2 which they did in 5 hours which i would say is good going.

The bold bloke is Joe from BG, he is the Spray Finish trainer. Top bloke

 

[warriorupnorth]

I love Flynny, Moderator who tells the truth.

So the rest of us tell lies then !!

 

[CKJ]

Them rooms in the Horncastle vid are 280m2 which they did in 5 hours which i would say is good going.

The bold bloke is Joe from BG, he is the Spray Finish trainer. Top bloke

3 men applying by hand in a room that size will each put on 40m2 so thats 40x3=120x2gauges=240m2 in 5 hours the macine only gives an extra 40m2 are they really worth it???

 

[McPlaster]

So the rest of us tell lies then !!

Sorry Paul but I don't know who to believe any more, it might be my age, 46 and developer builders lie to me about payments all the time ! It gets confusing you know, apologies to Mods.

 

[spunky]

advise what? 2 passes??

Everything really if it was me id fill the joints by hand then go for it like matey was 2 coats
Or is it bad I don't know ??

 

[nickelarse]

id 2 coat only coz i find 2 coating easier. each to there own i guess

 

[spunky]

Yeah whatever

 

[Curry]

3 men applying by hand in a room that size will each put on 40m2 so thats 40x3=120x2gauges=240m2 in 5 hours the macine only gives an extra 40m2 are they really worth it???

Well I don't think by hand 3 men would do that but say they did and the machine only did an extra 40m2. Let's say 3 squid a meter so a extra 120. Times that by 5. 600. Machine paid off in 10 weeks then on to extra profit. Which would be 40 quid in each mans pocket each day.

That's if its all 100% but to do 240 by hand would have to be 100% aswell

 

[Gibbo]

3 men would piss that

 

[DannyMac]

The quality of the finish looked shite in that video, even at that piss poor resolution. I bet close up is was proper wank.

That machine didn't half blast it on though, much quicker and easier than by hand if you ask me.

 

[spunky]

It looked slow to me I thought he'd be getting it on a bit tighter

 

[Curry]

The quality of the finish looked shite in that video, even at that piss poor resolution. I bet close up is was proper wank.

That machine didn't half blast it on though, much quicker and easier than by hand if you ask me.

They might have been s**t at it, hence selling their mtec

 

[DannyMac]

It looked slow to me I thought he'd be getting it on a bit tighter

I meant compared to hand applying it.

I know what you mean though about how heavy it was going on.

 

[flynnyman]

They might have been s**t at it, hence selling their mtec

There not s**t ive worked with them and they are all good spreads. Im not sure why he is selling the machine maybe like whats been said it aint any quicker, or maybe the mtec 100 only does certain plasters ie skim and acrylics or maybe he thought im never gonna get my money back on this hmmmmmmmmmmm who knows.

 

[Jace]

i reckon you knnow flynny but your hideing it from us haha:RpS_sneaky:

 

[henry]

ha, were you perving on my work once id left? thanks for not mentioning by the way happy

your going to have to get up early nick to get one over gibbo LOL

 

[spunky]

I meant compared to hand applying it.

I know what you mean though about how heavy it was going on.

Danny remember you're comparing that to 2-3 lads laying on not just 1

 

[potatoe]

that gear looks like it hangs. no way two hits in 5 hours

 

[joshuk1988]

alrateeee pp's first post era googled speedskim review and ended here, av just brought one today from ebay after reading this al use it smash back wall boards wen dot n dab'in, al get me 36 beans bak, sounds poo, i was lookin forward too 100mtr sets 200% more money

 

[nickelarse]

oh mate. this time next yr ul be a millionaire or your money back

 

[Jace]

used mine today it was ok i still went over it with a trowel after but it evened out the wall lovely, the fella who floated it out must have done it with a spoon, there's less waves at a Mexican football game than this wall had, speed-skim took care of them:RpS_thumbup: