today's work pictures
- Thread starter Danny
- Start date
- Status
PlasterCraftDundee
Well-Known Member
Arti
Well-Known Member
Just a haf shift thenOnly 7, 10 bags you slacking
Sent from my D2303 using Tapatalk
Arti
Well-Known Member
Now you got a white tranny you look more like a pikey
Sent from my D2303 using Tapatalk
thebearbeef
Well-Known Member
Can't chat gotta go price a driveway
scottie5
Private Member
It'll soon be orange.
thebearbeef
Well-Known Member
Don't say that!
scottie5
Private Member
Nah should be reet if you keep it clean.
Have you a sponge? .
Perhaps @spongebob007 could recommend one.
JackPlas91
Member
User___removed
Well-Known Member
Badgerrrrrrr
Well-Known Member
New 16 Nela arrived today, so put her to work on a little conservatory which was hard walled and skimmed. Like most people have said is is a very comfy trowel to use. I did stick her on the oil stone before I used it, like I do to all my new trowels. That is a Nela s*p*r*lex by the way. I believe these where designed to final trowel but used it the whole way through the set, MT lay on, flatten in with s*p*r*lex, MT lay on second coat, then s*p*r*lex from then on till finished and hey job done and a decent finish. For straight out of the box I got on well with it.
Hard walled up,of to cafe for fat boy breakfast then back and skim
Hard walled up,of to cafe for fat boy breakfast then back and skim
CTPlastering
Well-Known Member
Are you working in a book scottie ? Lol only joking
scottie5
Private Member
Ill take you a real photograph tomorrow Carl just to prove im not living in a aha video off of the 80's.
The artists impression looks a bit better than the real thing though.
a proper spread pal end off!!!
User___removed
Well-Known Member
It's there OCR bagged render.good gear to use and finishes nice with the Refina power sponge
JackPlas91
Member
Sent from my SM-G900F using Tapatalk
CTPlastering
Well-Known Member
What was the reason of the little cuttings of board on the beam mate ?
JackPlas91
Member
Was already like that, the guys who boarded all the walls cellists attempted to board the ditch beam
Sent from my SM-G900F using Tapatalk
CTPlastering
Well-Known Member
Ah no bother just seems odd to me !
Danny
-
plasjack
Active Member
The back of the house is like a Forrest overgrown!
Let's no light in at all. Always feel like your working a night shift [emoji28]
Danny
-
that looks damn good fun
PlasterCraftDundee
Well-Known Member
That looks nice! How were the letters formed?
scottie5
Private Member
Jbeesy718
Active Member
The wall was pre made off site and was dense polystyrene with like a thin coat render finish so the letters where formed before it came to site.
Danny
-
Beading up must have been fun
i have an interesting job this week, working on the badlands [brooklands] jaywick sands. board and skim internal, ewi on the external. it is a good laugh!
speculators are purchasing these properties for about £35k, a tidy up then rent out for £600 per month. to dhs clients. i have an order for 3 of them.
one on the neighbours had his boiler fitted on the outside of his home as he is that tight for space. last night someone came along and unbolted it so now he has no hot water or heat.
speculators are purchasing these properties for about £35k, a tidy up then rent out for £600 per month. to dhs clients. i have an order for 3 of them.
one on the neighbours had his boiler fitted on the outside of his home as he is that tight for space. last night someone came along and unbolted it so now he has no hot water or heat.
plasjack
Active Member
Jaywick? I'm sure there was a program called jaywick - life on the dole? [emoji28][emoji28] meant to be a right s**t hole there
- Status