Search results

The Hiron mate

Am I to dear or what? went to look at a job the other day two downstairs rooms 11'x10' float chimney breast Face and cheeks, float both walls either side, over skim both rooms including ceilings went in at £750 including Matt's, I get a text next day saying I'm between £100 and £200 to...

:RpS_thumbsup:

Hi Mate

If You insist,

Hi the walls would need to have a couple of coats of PVA, then a tight coat of bonding, which is ruled off flat with a straight edge. Then skimmed in the usual way.

Hello mate

Welcome

Happy Birthday Bitch!!!!!!

I've lost a lot of work because I can't get near the guys who will do it for cash,

Fair shout spunky, I think thats the only way to go and bed the mesh into the first coat of scim or into a tight coat of bonding

Think I would strip it off, couple of coats pva then a tight coat of bonding, and scim as usual when thats pulled in.

I know what you mean mate, was going to start a hall stairs and landing tomorrow, we went round to see the bloke and he says he's doing nights so don't want us for a couple of weeks, I've got nothing certain booked in at the moment,

Amhed will this work? If I float out a wall then stick sheets of newspaper to it will this make it like plasterboard? Then can scim with board finish?

Gutanga my friend!!!!!!

Came round to look and saw a bowl full of penny toffees in a bowl, so got back in the van, LOL

Get some sandbags!

What you getting the misses a set off saucepans???? :RpS_thumbsup:

I use flour and water!!!!

Try a tight coat of bonding

We could have a 69 (sweet and sour chicken) Wink Wink LOL

Yo! You Old Fart!!!!!!!!!!!!

I will learn you how to use my small tool!!!!

Got it in both arms, Trowel arms the worst, I use arm braces when i'm working and the best ones i've found are the EPI sport ones off ebay for about £18 each, I try to avoid taking gear straight out of the bucket with a bucket trowel,

Bought my misses a wooden leg for christmas! It's not her main present, it's just a stocking filler!!!!!!!!!!!!:RpS_lol:

It dont move off your drive!!! LOL

I've cut the wings down on mine, seen some mini internal trowels on ebay which look like mine does now,

get a good extractor in the bathroom, I get the same problem this time of year, spray the black spots with mould spray from homebase,

Hammer and nails when I was at college, Still got a lath hammer somwhere, LOL

Mine does it all the time I have to carry a pair of long nose pliers with me to clear it, sometimes the screw screws into the metal on the front of the gun, poor design.

Ebay, stick to Marshalltown for your trowels, Stanley Fatmax for your levels and snips, Knife etc. Don't buy cheap tools as they wont last long,

I'm clean and punctual, hard grafter, Polite, I was hoping to muck in with a bit of open heart surgery tomorrow at the local hospital, Whats the chances ?????

Twit with an A!!!!

This should be called Spunkys Abuse Forum, First Class ****!!!!!!!!!!!!!!!!!!

Beddy, Allesley GN

when working with another spread, winds me up when they put their hawk and trowel on the spot when I'm trying to gear off it, I know one spread who f**ks it on the floor.

Scutch hammer it then dot and dab

Go on Gypsums website, It says that over mixing leads to deterioration in workability and creates difficulty in achieving a flat finish.

I just put an illuminous durex on my cock and I light up the room like Darth Vader!!!!! LOL

Pole Cat!!!!

We all get them mate, as long as there flat and you can't feel them don't worry about it, it looks worse while its drying out, Don't know if it could be over whisking, over skimmed a lounge last week with board finish, didn't get any nice finish, over skimmed a couple of walls Saturday with...

Plastering tones you up,

Everybody wants skilled tradesmen to work for f**k all, quoted a lot of jobs lately and went in at reasonable rate as not to rob anybody and still not got them, Might as well go and stack shelves do at Aldi, for the same kind of money people want to pay. If a gas fitter turns up to look at a...

Spoke proper England!!!

Thanks for all the advice, seeing a physio in a couple of weeks, hope he has some answers, Thanks again everyone

Hi, anyone suffering from tennis elbow, I've got it in both arms had the injections which don't work, I can live with the left arm (hawk hand) but right arm killing me on the trowel, I've got the copper bracelets with magnets, I would be grateful of some serous advice, Cheers

Yep WD40 works great

Get some sky hooks and a long wait!!!!!!!!!!

Yeah follow the ling above to Direct building products If you want to wait forever for it to arrive

Doesn't matter which way you get it on (up down or accross) just get it on and drop staight back to tidy it up,