Plasterers1StopShop
Well-Known Member
New products are always entering the market in the UK and this is something we are especially excited about.
We are pleased to have recently become an approved dealer and training centre for Aero-Therm products both Machine and Hand Applied.
At PFT Central we are going to create a specialised applicator network and be actively promoting the Aero-Therm products to home-owners, with the aim of bringing leads to our applicators.
We are currently looking to build our applicator network, if this is of interest to you, please get in touch and we will be happy to speak to you
Here is some information on the Aero-Therm range:
Aero-Therm is a new form of insulation that takes a revolutionary new approach to keeping the rooms in your home warm and comfortable. Using the latest technical developments in heat and energy conservation, it provides an extremely effective ultra-thin heat reflective coating which can be easily applied to internal walls and ceilings.
With only a 1mm thick coating, Aero-Therm is able to rapidly absorb and emit the available radiant energy around the room, continually working to balance the temperature differentials between the walls, ceilings, furniture and occupants. This results in a stable thermal comfort for the occupants, which can be achieved at a lower thermostat setting.
As the AeroTherm coating is able to adapt quickly and warm up to room temperature, the wall surfaces are also warm. This removes the chill factor often felt in poorly insulated or solid wall properties with cold external walls. These warm walls also reduce the conditions for condensation to form on the surface and so help to prevent mould growth.
As the heat is being contained within the room and not allowed to be easily soaked up into the walls, it provides quicker warm up times, longer cool down times and more balanced room temperatures, allowing the heating system to be more efficient and reduce its output. Recognised independent testing has shown significant energy savings of up to 35%, which is similar to conventional IWI and EWI insulation systems. It also has many practical advantages over these complex and disruptive systems.
The AeroTherm application consists of two simple stages. The first is to apply the base coat followed by the AeroTherm paste using techniques similar to plastering. The AeroTherm then needs to be left to dry for around 24 hours before the second stage of sanding it down to a smooth finish, which is then ready for decorating.
Many homeowners, especially those with solid walls or original features have long struggled to find an effective insulation product which doesn’t impact on the visual or spatial characteristics of the room. Aero-Therm provides the solution to these issues and is set to transform how we insulate our homes.
Standard prices and information can be found here: Link Removed
For more information on the range or to become a approved applicator, please email me: [email protected]
Ryan Hill
PFT Central - Plasterers 1 Stop Shop
We are pleased to have recently become an approved dealer and training centre for Aero-Therm products both Machine and Hand Applied.
At PFT Central we are going to create a specialised applicator network and be actively promoting the Aero-Therm products to home-owners, with the aim of bringing leads to our applicators.
We are currently looking to build our applicator network, if this is of interest to you, please get in touch and we will be happy to speak to you
Here is some information on the Aero-Therm range:
Aero-Therm is a new form of insulation that takes a revolutionary new approach to keeping the rooms in your home warm and comfortable. Using the latest technical developments in heat and energy conservation, it provides an extremely effective ultra-thin heat reflective coating which can be easily applied to internal walls and ceilings.
With only a 1mm thick coating, Aero-Therm is able to rapidly absorb and emit the available radiant energy around the room, continually working to balance the temperature differentials between the walls, ceilings, furniture and occupants. This results in a stable thermal comfort for the occupants, which can be achieved at a lower thermostat setting.
As the AeroTherm coating is able to adapt quickly and warm up to room temperature, the wall surfaces are also warm. This removes the chill factor often felt in poorly insulated or solid wall properties with cold external walls. These warm walls also reduce the conditions for condensation to form on the surface and so help to prevent mould growth.
As the heat is being contained within the room and not allowed to be easily soaked up into the walls, it provides quicker warm up times, longer cool down times and more balanced room temperatures, allowing the heating system to be more efficient and reduce its output. Recognised independent testing has shown significant energy savings of up to 35%, which is similar to conventional IWI and EWI insulation systems. It also has many practical advantages over these complex and disruptive systems.
The AeroTherm application consists of two simple stages. The first is to apply the base coat followed by the AeroTherm paste using techniques similar to plastering. The AeroTherm then needs to be left to dry for around 24 hours before the second stage of sanding it down to a smooth finish, which is then ready for decorating.
Many homeowners, especially those with solid walls or original features have long struggled to find an effective insulation product which doesn’t impact on the visual or spatial characteristics of the room. Aero-Therm provides the solution to these issues and is set to transform how we insulate our homes.
Standard prices and information can be found here: Link Removed
For more information on the range or to become a approved applicator, please email me: [email protected]
Ryan Hill
PFT Central - Plasterers 1 Stop Shop
Last edited:
As it does not trowel up like finish
