First day with Ritmo.

[puddove]

I can buy one bead of any colour if i want ,just shop around ,i got court out with all that full box s**t back in the day

you sound like a yorkshire man buying 1 bead at a time

 

[vfr12]

It's just easier and less strain on the body I thought Ian.
I'll try it a little wetter next time.
The first panel seemed a little to wet to do in one pass so we went a bit stiffer but that one did feel a little more stiffer on the ruling off.





Sent from my iPhone using Tapatalk

Good ribbons ! Some people are ready to kill for it!

 

[Wezly]

J Green, build yourself a mezzanine floor up high in your garage for bead stock, get on to SAS, strike a deal and get stocks of ivory and white in drips, stops and angles, ivory and white covers most bases. If you're rendering all year round you'll save £100's compared to buying as you go.

 

[keithuk]

you sound like a yorkshire man buying 1 bead at a time

more getting a point across ,lol....and how very dare you !

 

[kylethetile]

Had our very first spray with our ritmo today.
Picked it up and has training last Friday.

We were spraying EHI one pass (ish) over matie.

Had a hiccup at start where we weren't giving enough time for mix to come through after adjusting water and almost caused a blockeage.
Luckily Ian from @PFTwales was on the phone and helped us through quickly enough.

We Sprayed 60m2 including set up, the hiccup and clean down in about 4.5hours.

Videos aren't the best but we were more worried about nothing going wrong first time.

Any constructive criticism would be appreciated, if you just want a pick fault for the sake of it without helping then f**k off.

Advice appreciated.
Spraying again early next week.
Then got about 10 jobs booked for April onwards.
We only use Parex and have the ritmo L if this helps.

Link RemovedLink Removed



Sent from my iPhone using Tapatalk

If u don't mind me asking how much will one of them set me back ?

 

[MikeAtthis]

If u don't mind me asking how much will one of them set me back ?

@UKPlasteringmachines will help you out with that

 

[PFTwales]

@UKPlasteringmachines will help you out with that

or pft wales

 

[MikeAtthis]

or pft wales

Oops sorry Ian


Sent from my iPhone using Tapatalk

 

[PFTwales]

birrov a cheek seen as the machine came from us . wales int that far of the map

 

[Jgreenplastering]

If u don't mind me asking how much will one of them set me back ?

Give Ian from PFT Wales a call mate. He will give you all the info you need.


Sent from my iPhone using Tapatalk

 

[kylethetile]

Come on fellas roughly 2 3 4 5 grand ?

 

[Leeroy]

Ritmo L are over 6k mate I think, but loads rate them top machines

 

[User___removed]

6 grand plus vat
If your skint get one on finance.
If you have work lined up it will pay for itself within a year or two

 

[owls]

A little machine on finance ..
What do you do, put a kidney down as a deposit.

 

[MikeAtthis]

A little machine on finance ..
What do you do, put a kidney down as a deposit.

just an arm and maybe a leg

 

[PFTwales]

5400 plus vat for a full set up if you're not so far from wales

 

[Rigsby]

5400 plus vat for a full set up if you're not so far from wales

Is that for the 'L'?

 

[spunky]

You want to try a 3 phase or a diesel now you've got a taste for it mate there twice as quick as the ritmos

 

[PFTwales]

Is that for the 'L'?

Yes

 

[PFTwales]

You want to try a 3 phase or a diesel now you've got a taste for it mate there twice as quick as the ritmos

most the guys with ritmos dont need it any faster. their not blamming the shazzle onto new blocks

 

[keithuk]

i did not think there was much difference between the 2 ? ,what do i know, leave that to the experts

 

[user__removed]

You want to try a 3 phase or a diesel now you've got a taste for it mate there twice as quick as the ritmos

I've gone from the 24 to a m330 and need a slower rotar and stator tbh 22 l/min is quick man.

 

[Arti]

5400 plus vat for a full set up if you're not so far from wales

pretty much what i paid for mine off les

 

[MikeAtthis]

I've gone from the 24 to a m330 and need a slower rotar and stator tbh 22 l/min is quick man.

you need one to slow it down to the ritmo speed lol

 

[Wezly]

I've gone from the 24 to a m330 and need a slower rotar and stator tbh 22 l/min is quick man.

Sounds like its the wrong machine for your needs then.

 

[MikeAtthis]

Sounds like its the wrong machine for your needs then.

Good talking salesman lol


Sent from my iPhone using Tapatalk

 

[Plasterers1StopShop]

With the M330 you can vary the R/S output from 14l/min up-to 24l/min, even faster if required - Rory has experience of slower machines and had the option for the M100 which has the same output as a Ritmo.

If it wasn't the right machine for him, it wouldn't have been advised. Im also confident in saying, he isn't stupid and has experience in using machines - if it wasn't right for him he wouldn't have asked for it and bought it

 

[user__removed]

Sounds like its the wrong machine for your needs then.

The eze 24 seemed fast at first we will get used to it, and at least we have the power when we need it.

 

[MikeAtthis]

only joking ryan lol

 

[MikeAtthis]

can you not change the r/s on them

 

[Plasterers1StopShop]

only joking ryan lol

I know you are Mike

 

[Plasterers1StopShop]

can you not change the r/s on them

We are potentially bringing out another R/S for the EZE 24 but it wont be much faster to be honest.

We are focusing on our new machine at the moment though

 

[User___removed]

We are potentially bringing out another R/S for the EZE 24 but it wont be much faster to be honest.

We are focusing on our new machine at the moment though

Will it be a copy of the ritmo L but blue?

 

[Plasterers1StopShop]

Will it be a copy of the ritmo L but blue?

For a man with so much machine knowledge you should know the M100 is the equivalent to a Ritmo.

Also, we won't sell 240v machinery and will always stand by that until Sites / Main contractors / public liability insurance are all happy with it

 

[Wezly]

The eze 24 seemed fast at first we will get used to it, and at least we have the power when we need it.

What type of work do you do then, I thought you were mainly domestic.